Comparison of Commonly Used Cooling Concepts for Electrical Machines in Automotive Applications
Open Access
Abstract
The thermal design of electrical machines has numerous influencing factors. This paper compares different cooling methods, their volume flow rates and other machine parameters with regard to the continuous power of a PMSM. Understanding the characteristics of different heat sinks depending on their operating point is important for an expedient design in order to avoid derating due to overtemperatures. As a design guideline, this contribution shows the influence of stator cooling jackets, rotor shaft cooling and direct end winding cooling for different machine lengths and volume flow rates. Both water and oil are investigated as coolants. With increasing machine dimensions, end winding cooling becomes less effective for heat sources in the center of the machine while the heat transferred in the cooling jacket increases. A sensitivity study of other machine parameters, such as the maximum allowed magnet temperature or the coolant inlet temperature, improves the understanding of the reader as to how the continuous power of a PMSM can be increased when the rotor temperature limits the performance.Keywords
Funding Information
- KIT Karlsruhe (-)
This publication has 27 references indexed in Scilit:
- A flux barrier cooling for traction motors in hybrid drives2015
- Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An OverviewIEEE Transactions on Industrial Electronics, 2014
- Discussing details of lumped parameter thermal modeling in electrical machines2014
- A review of heat transfer between concentric rotating cylinders with or without axial flowInternational Journal of Thermal Sciences, 2011
- Convective heat transfer inside a rotating cylinder with an axial air flowInternational Journal of Thermal Sciences, 2006
- Solving the More Difficult Aspects of Electric Motor Thermal Analysis in Small and Medium Size Industrial Induction MotorsIEEE Transactions on Energy Conversion, 2005
- Fluid flow and heat transfer in an axially rotating pipe subjected to external convectionInternational Journal of Heat and Mass Transfer, 1992
- Fluide flow and heart transfer inan axially roatating pipe—II. Effect of rotation on laminar pipe flowInternational Journal of Heat and Mass Transfer, 1989
- Fluid flow and heat transfer in an axially rotating pipe—I. Effect of rotation on turbulent pipe flowInternational Journal of Heat and Mass Transfer, 1989
- Heat Transfer to a Fluid Flowing Inside a Pipe Rotating About Its Longitudinal AxisJournal of Heat Transfer, 1969