Enhanced fracture behavior of aluminum joints with multi-walled carbon nanotube and polyvinyl alcohol nanofiber reinforced epoxy adhesives
Authors:
- Mürsel EkremMEMürsel Ekrem
- Yasin UslugilYasin Uslugil
- Ahmet AvcıAAAhmet Avcı
Open Access
- 13 June 2026
- journal article
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 9 (5)
Abstract
The objective of this study is to investigate and compare two different reinforcement routes for epoxy-bonded AA2024-T3 aluminum joints: direct incorporation of multi-walled carbon nanotubes (MWCNTs) into the epoxy matrix and interleaf-based reinforcement using electrospun PVA/MWCNT nanofiber mats. The novelty lies in the direct comparison of these two approaches within the same bonded-joint framework under both shear and Mode I fracture loading conditions. Neat epoxy was used as the reference, while an epoxy with 1 wt.% MWCNT represented the direct nanotube-reinforced system. In the interleaved configurations, the epoxy matrix remained MWCNT-free and the reinforcement was provided solely by PVA nanofiber mats with or without 1–5 wt.% MWCNT. Electrospun nanofiber mats with an average thickness of approximately 0.13 mm were obtained, and the nanofiber diameters decreased from 222–403 nm to 95–192 nm with the addition of MWCNTs to the PVA solution. In single-lap shear tests, the maximum load value was 7804 N for neat epoxy, increased to 8824 N for the epoxy system containing 1 wt.% MWCNT, and reached 9437 N for the joints using a PVA nanofiber mat containing 1 wt.% MWCNT. Joint toughness increased from approximately 1204 kJ/m $$^3$$ to 1954 kJ/m $$^3$$ for the hybrid system with 3 wt.% MWCNT, but decreased at higher MWCNT contents, which may be associated with less uniform dispersion and local defect formation. In double cantilever beam tests, the EPCNT1 sample exhibited an average $$G_{Ic}$$ increase of about 231% relative to neat epoxy.
Keywords
Funding Information
- KTO Karatay University
This publication has 56 references indexed in Scilit:
- Electrospun 3D nanofibrous materials and their applications in orthopaedicsAdvanced Composites and Hybrid Materials, 2024
- Studies on fracture mechanics of self-healing epoxy nanocomposite-based carbon nanotube and glass fibersThe International Journal of Advanced Manufacturing Technology, 2024
- Machine learning applications for electrospun nanofibers: a reviewJournal of Materials Science, 2024
- A Review on the Impact of Humidity during Electrospinning: From the Nanofiber Structure Engineering to the ApplicationsMacromolecular Materials and Engineering, 2021
- Surface-modified alumina nanoparticles-filled aramid fiber-reinforced epoxy nanocomposites: preparation and mechanical propertiesIranian Polymer Journal, 2020
- Effect of nanomaterials/nanofibers on the structure and properties of fiber-reinforced composites2020
- The effects of carbon nanotubes added polyvinyl alcohol nanofibers on mechanical properties of carbon reinforced composite laminatesSādhanā, 2019
- Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide‐6,6 electrospun nanofibersJournal of Applied Polymer Science, 2017
- Electrospinning PVA solution-rheology and morphology analysesFibers and Polymers, 2012
- Science and Technology of Polymer Nanofibers2007