Three-Dimensional Finite Element Analysis of the Effects of Ligaments on Human Sacroiliac Joint and Pelvis in Two Different Positions
- 8 April 2020
- journal article
- research article
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 142 (8)
Abstract
To present the ligament effects on sacroiliac joint (SIJ) stability and human pelvis biomechanical characteristics in two different positions by using three-dimensional (3D) finite element (FE) models of pelvis. Based on the computed tomography (CT) data of human pelvis, three-dimensional FE models of human pelvis in sitting and standing positions were established, which include the bone (sacrum, ilium, and coccyx) and six ligaments (sacroiliac, sacrospinous, sacrotuberous, inguinal, superior pubic, and arcuate pubic ligaments). 600 N vertical load was applied at the upper surface of sacrum to analyze the stress and displacement distribution of pelvis and SIJ. The simulation results demonstrated that the maximum stresses of sacrum and ilium on SIJ contact surface were 5.63 MPa and 7.40 MPa in standing position and 7.44 MPa and 7.95 MPa in sitting position. The stresses of ligament dysfunction group were higher than that of health group, which increased by 22.6% and 35.7% in standing position and 25.2% and 43.6% in sitting position in sacrum and ilium. The maximum displacements located on the upper surface of sacrum, which were 0.13 mm and 1.04 mm in standing and sitting positions. Ligaments dysfunction group increased 30.7% and 9.6% than health group in standing and sitting positions. The integral displacement of pelvis was greater in sitting position. The location of stress concentration and displacement distribution of pelvic bone are closely resembled previous research results in two different positions. The simulation results may provide beneficial information and theoretical models for clinical research of pelvic fracture, joint movement, and ligament functional injuries, and so on.Keywords
This publication has 33 references indexed in Scilit:
- Mechanical comparison between lengthened and short sacroiliac screws in sacral fracture fixation: A finite element analysisOrthopaedics & Traumatology: Surgery & Research, 2013
- The Effect of Boundary Condition on the Biomechanics of a Human Pelvic Joint Under an Axial Compressive Load: A Three-Dimensional Finite Element ModelJournal of Biomechanical Engineering, 2011
- Systematic review of tests to identify the disc, SIJ or facet joint as the source of low back painEuropean Spine Journal, 2007
- Vibration testing of a fresh-frozen human pelvis: The role of the pelvic ligamentsJournal of Biomechanics, 2007
- Sacroiliac Joint Pain: A Comprehensive Review of Anatomy, Diagnosis, and TreatmentAnesthesia & Analgesia, 2005
- Development and Validation of a Three-Dimensional Finite Element Model of the Pelvic BoneJournal of Biomechanical Engineering, 1995
- Load transfer across the pelvic boneJournal of Biomechanics, 1995
- The Sacroiliac Joint in Chronic Low Back PainSpine, 1995
- Role of body position, gender, and age on pelvic floor location and mobilityDigestive Diseases and Sciences, 1992
- Load‐displacement behavior of sacroiliac jointsJournal of Orthopaedic Research, 1987