Effect of annealing heat treatment on microstructure and mechanical properties of nonequiatomic CoCrFeNiMo medium-entropy alloys prepared by hot isostatic pressing
Authors:
Open Access
- 1 January 2020
- journal article
- research article
- Published by Walter de Gruyter GmbH in Nanotechnology Reviews
- Vol. 9 (1) , 580-595
Abstract
In this study, nonequiatomic Co28.5Cr21.5Fe20Ni26Mo4 medium-entropy alloys (MEAs) were prepared using hot isostatic pressing. The effect of annealing heat treatment on microstructure and mechanical properties of MEAs was investigated. The results showed that the microstructure of as-sintered alloys was mainly composed of the face-centered cubic (FCC) phase and μ phase. The presence of the μ phase could improve the compressive strength of Co28.5Cr21.5Fe20Ni26Mo4 MEAs. Meanwhile, the ductile FCC phase matrix could effectively suppress the propagation of cracks to improve its ductility. Hence, as-sintered MEAs possessed excellent compression properties, and the average compressive strength value was 2,606 MPa when the strain was 50%. Compared with as-sintered MEAs, the phase composition of as-annealed MEAs did not change. The micro-hardness of annealed MEAs was stable compared to as-sintered MEAs (342 HV), and its fluctuation was about ±30 HV. The compressive strength of the annealed MEAs did not alter greatly, and the maximum fluctuation value was only about 6.5%. Hence, Co28.5Cr21.5Fe20Ni26Mo4 MEAs had excellent thermal stability.Keywords
This publication has 57 references indexed in Scilit:
- Age-hardening of the CoCrFeNiMo0.85 high-entropy alloyMaterials Characterization, 2013
- Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloyScripta Materialia, 2013
- Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloysMaterials Characterization, 2012
- Prediction of high-entropy stabilized solid-solution in multi-component alloysMaterials Chemistry and Physics, 2012
- Refractory high-entropy alloysIntermetallics, 2010
- Annealing on the structure and properties evolution of the CoCrFeNiCuAl high-entropy alloyJournal of Alloys and Compounds, 2010
- Characterization of multi-element alloy claddings manufactured by the tungsten inert gas processSurface and Coatings Technology, 2009
- Microstructure and mechanical properties of CoCrFeNiTiAl high-entropy alloysMaterials Science and Engineering: A, 2009
- Alloying behavior of iron, gold and silver in AlCoCrCuNi-based equimolar high-entropy alloysMaterials Science and Engineering: A, 2007
- Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo AlloysMATERIALS TRANSACTIONS, 2007