Comparison of simplex and duplex drum brakes linings with transverse slots in vehicles
Author:
- 18 September 2024
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 239 (10-11) , 5103-5116
Abstract
In this paper, experimental comparison between Simplex and Duplex drum brake units performance for three different drum lining profile designs is carried out. The three linings profiles are normal (no slot), with one slot and with three slots. In this study, brake test rig has been designed to represent the actual braking process environment. Brake oil pressure and drum speed are the operational parameters that are varied during the experimental work. From the experimental work and mathematical models for brake force, brake factor, and final friction temperature, the comparisons were carried out. The final conclusions indicate that lining with one slot profile is the most suitable, since the percentage improvement of mean brake force and brake factor of duplex drum brake (D) linings versus simplex drum brake (S) linings reaching 84.09% and 82.73% higher than three slots lining profile but lower than lining with normal profile at low pressure 5 bar and low speed 50 rpm. Also, the percentage improvement of mean primary shoe final friction temperature reduction for the one slot profile reaches 30.00% higher than normal lining profile but lower than lining with three slots profile at high pressure 20 bar and drum speed 50 rpm.Keywords
This publication has 8 references indexed in Scilit:
- Output Parameters of a Drum Brake with Floating ShoesRussian Engineering Research, 2023
- “Evaluation of an electromagnetically actuated drum brake concept”Automotive and Engine Technology, 2023
- Drum brake temperature: A potential energy source for electric buses from the braking temperatureAIP Conference Proceedings, 2021
- Simulated Braking Performance Comparison of an Electric Drum Brake and a Hydraulic Drum Brake SystemsIOP Conference Series: Materials Science and Engineering, 2020
- Concept of a torque sensor for simplex drum brakesAutomotive and Engine Technology, 2020
- Study on brake performance of new drum brakeIOP Conference Series: Materials Science and Engineering, 2019
- Analysis of Drum Brake System for Improvement of Braking Performance2018
- Thermal Analysis of a Rear Drum Brake for Lightweight Passenger VehiclesSAE International Journal of Advances and Current Practices in Mobility, 2014