Mechanical Response of Composite Wood–Concrete Bonded Facade Under Thermal Loading
Open Access
Abstract
The integration of wood and concrete in building structures is a well-established practice typically realized through mechanical connectors. However, the thermomechanical behavior of wood–concrete composite façades assembled via adhesive bonding remains underexplored. This study introduces a novel concept—the adhesive-bonded wood–concrete façade, termed “Hybrimur”—and evaluates the response of these façade panels under thermal gradients, with a focus on thermal bowing phenomena. Four full-scale façade prototypes (3 m high × 6 m wide), consisting of 7 cm thick concrete and 16 cm thick laminated timber (GL24h), were fabricated and tested both with and without insulation. Two reinforcement types were considered: fiberglass-reinforced concrete and welded mesh reinforcement. The study combines thermal analysis of temperature gradients at the adhesive interface with analytical and numerical methods to investigate thermal expansion effects. The experimental and numerical results revealed thermal strains concentrated at the wood–concrete interface without inducing panel failure. Thermal bowing (out-of-plane deflection) exhibited a nonlinear behavior influenced by the adhesive bond and the anisotropic nature of the wood. These findings highlight the importance of accounting for both interface behavior and wood anisotropy in the design of hybrid façades subjected to thermal loading. A tentative finite element model is proposed that utilizes isotropic wood with properties that limit the accuracy of the results obtained by the model.Keywords
Funding Information
- French Environmental agency ADEME, project Hybridal
This publication has 33 references indexed in Scilit:
- Study on shear behavior of inclined cross lag screws for glulam-concrete composite beamsConstruction and Building Materials, 2019
- Experimental and analytical study of the mechanical behavior of heterogeneous glulam–concrete beams and panels assembled by a specific treatment of woodConstruction and Building Materials, 2018
- Innovative steel-glass components for high-performance building skins: testing of full-scale prototypesGlass Structures & Engineering, 2016
- Environmentally friendly high performance timber–concrete panelConstruction and Building Materials, 2016
- Three-layered plate: Elasticity solutionComposites Part B: Engineering, 2014
- Modelling the bending behaviour of a new hybrid glulam beam reinforced with FRP and ultra-high-performance concreteApplied Mathematical Modelling, 2012
- Using life cycle assessment to derive an environmental index for light-frame wood wall assembliesBuilding and Environment, 2010
- Experimental analysis of laterally loaded nailed timber-to-concrete connectionsConstruction and Building Materials, 2009
- Laboratory tests of composite wood–concrete beamsConstruction and Building Materials, 2008
- Performance evaluation of sandwich panels subjected to bending compression and thermal bowingMaterials and Structures, 1980