Application of vibration-based methods for estimating radiated sound power of ethylene tetrafluoroethylene facades: Validation using a scaled model
- 1 June 2026
- journal article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 159 (6) , 5023-5037
Abstract
The accurate determination of the sound insulation of building facades in the field can be affected by the limitations of standardized methods based solely on sound pressure measurements (e.g., ISO 16283-3:2016), particularly for lightweight, curved, and flexible systems, such as ethylene tetrafluoroethylene cushions. ISO 16283-3 defines a practical and time-efficient procedure for objectively assessing the sound insulation properties of envelopes and facade elements, assuming that the envelope separates two acoustic environments of different nature (assuming a free acoustic field on the exterior side and a diffuse sound field on the interior side). This study discusses three vibration-based sound power estimation models: the acoustic radiation matrix method, Rayleigh's integral method, and the discrete calculation method. The surface vibration velocities of a curved ethylene tetrafluoroethylene cushion and a polyurethane cushion were measured by scanning laser Doppler vibrometry. The models were validated against full field finite element simulations and standardized sound intensity measurements (ISO 9614-2:1996), enabling a direct comparison between numerical and experimental approaches. The results show strong agreement between the methods, with acoustic radiation matrix providing particularly consistent near-field pressure and sound-power estimates when compared with FEM. Additionally, parametric studies reveal that increasing internal pressure shifts radiated energy toward higher frequencies, while greater curvature enhances radiation efficiency. Although the present work focuses on the transmitted (radiated) component, the ability to estimate radiated sound power from measured surface vibrations provides an essential basis for future extensions toward full transmission-loss metrics, such as the sound reduction index, which depend on the ratio of incident and radiated acoustic power. The framework therefore offers a non-invasive tool to complement existing pressure- and intensity-based approaches for the acoustic characterization of lightweight and adaptive facade systems.Keywords
Funding Information
- HORIZON EUROPE Marie Sklodowska-Curie Actions (HORIZON –)
- HORIZON EUROPE Marie Sklodowska-Curie Actions (MSCA –)
- HORIZON EUROPE Marie Sklodowska-Curie Actions (2021 –)
- HORIZON EUROPE Marie Sklodowska-Curie Actions (DN)
- HORIZON EUROPE Marie Sklodowska-Curie Actions (No. 101072598)
This publication has 20 references indexed in Scilit:
- Optimization of sound insulation of flat panel photobioreactors for bioenergy facadesArchitecture, Structures and Construction, 2023
- On the use of dynamic vibration absorbers to counteract the loss of sound insulation due to mass-spring-mass resonance effects in external thermal insulation composite systemsApplied Acoustics, 2021
- Benchmarking the vibration velocity-based measurement methods to determine the radiated sound power from floor elements under impact excitationApplied Acoustics, 2020
- The sound insulation of façades at frequencies 5–5000 HzBuilding and Environment, 2019
- Assessment of the sound reduction index of building elements by near field excitation through an array of loudspeakers and structural response measurements by laser Doppler vibrometryApplied Acoustics, 2018
- Assessment of the airborne sound insulation from mobility vibration measurements; a hybrid experimental numerical approachJournal of Sound and Vibration, 2018
- Sustainable Panels with Recycled Materials for Building Applications: Environmental and Acoustic CharacterizationEnergy Procedia, 2016
- Revision of international standards on field measurements of airborne, impact and facade sound insulation to form the ISO 16283 seriesBuilding and Environment, 2015
- Acoustics in architectural fabric structures2015
- Influence of loudspeaker directivity and measurement geometry on direct acoustic levels over façades for acoustic insulation tests with the International Standard ISO 140-5Applied Acoustics, 2012