Controlling residual stress and distortion of friction stir welding joint by external stationary shoulder
Authors:
Open Access
- 1 January 2019
- journal article
- research article
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 38 (2019) , 662-671
Abstract
Friction stir welding (FSW) can achieve a sound welding joint, but its residual stress and distortion cannot be avoided due to the non-uniformity of temperature distribution during welding. Stationary shoulder friction stir welding (SSFSW) was employed to butt weld 6005A-T6 aluminum alloy plates. The effects of welding speeds ranging from 200 mm/min to 600 mm/min on residual stress and distortion were investigated in detail. A thermo-mechanical model was utilized to compare the residual stress distribution between conventional FSW and SSFSW. SSFSW was beneficial to decreasing the peak temperature of stir zone (SZ) and then obtaining a narrower SZ. The peak residual stress produced by SSFSW was 50% lower than that by conventional FSW and a narrower tensile stress region was attained by SSFSW. Moreover, the stationary shoulder applied a function of synchronous rolling during the welding, which controlled the distortion effectively.Keywords
This publication has 34 references indexed in Scilit:
- Effect of Rotation Speed to Welding Speed Ratio on Microstructure and Mechanical Behavior of Friction Stir Welded Aluminum–Lithium Alloy JointsAdvanced Engineering Materials, 2013
- Effects of tool rotation speed on microstructures and mechanical properties of AA2219-T6 welded by the external non-rotational shoulder assisted friction stir weldingMaterials & Design (1980-2015), 2013
- A study on microstructures and residual stress distributions in dissimilar friction-stir welding of AA5086–AA6061Journal of Materials Science, 2012
- Friction Stir Welding of HSLA-65 Steel: Part II. The Influence of Weld Speed and Tool Material on the Residual Stress Distribution and Tool WearMetallurgical and Materials Transactions A, 2011
- Friction Stir Welding of Al Alloy Thin Plate by Rotational Tool without PinJournal of Materials Science & Technology, 2011
- Effect of process parameters on the residual stresses in AA5083-H321 friction stir weldsMaterials Science and Engineering: A, 2009
- The effect of tensioning and sectioning on residual stresses in aluminium AA7749 friction stir weldsMaterials Science and Engineering: A, 2008
- Residual Stresses of Friction Stir Welded 2024-T4 JointsMaterials Science Forum, 2008
- Friction stir welding characteristics of different heat-treated-state 2219 aluminum alloy platesMaterials Science and Engineering: A, 2006
- Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir weldsActa Materialia, 2003