Performance Evaluation of Two Heat Transfer Models of a Walking Beam Type Reheat Furnace
- 8 August 2014
- journal article
- research article
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 36 (1) , 91-101
Abstract
Two different heat transfer models for predicting the transient heat transfer characteristics of the slabs in a walking beam type reheat furnace are compared in this work. The prediction of heat flux on the slab surface and the temperature distribution inside the slab have been determined by considering thermal radiation in the furnace chamber and transient heat conduction in the slab. Both models have been compared for their accuracy and computational time. The furnace is modeled as an enclosure with a radiatively participating medium. In the first model, the three-dimensional (3D) transient heat conduction equation with a radiative heat flux boundary condition is solved using an in-house code. The radiative heat flux incident on the slab surface required in the boundary condition of the conduction code is calculated using the commercial software FLUENT. The second model uses entirely FLUENT along with a user-defined function, which has been developed to account for the movement of slabs. The results obtained from both models have a maximum temperature difference of 2.25%, whereas the computational time for the first model is 3 h and that for the second model is approximately 100 h.Keywords
This publication has 12 references indexed in Scilit:
- Comparisons of different heat transfer models of a walking beam type reheat furnaceInternational Communications in Heat and Mass Transfer, 2013
- A numerical analysis of slab heating characteristics in a walking beam type reheating furnaceInternational Journal of Heat and Mass Transfer, 2010
- Transient radiative heating characteristics of slabs in a walking beam type reheating furnaceInternational Journal of Heat and Mass Transfer, 2009
- A Coupled Numerical Study of Slab Temperature and Gas Temperature in the Walking-Beam-Type Slab Reheating FurnaceNumerical Heat Transfer, Part A: Applications, 2008
- Numerical Modeling of a Walking-Beam-Type Slab Reheating FurnaceNumerical Heat Transfer, Part A: Applications, 2008
- A heat transfer model for the analysis of transient heating of the slab in a direct-fired walking beam type reheating furnaceInternational Journal of Heat and Mass Transfer, 2007
- Heat transfer analysis of pusher type reheat furnaceIronmaking & Steelmaking: Processes, Products and Applications, 2005
- The Modeling of the Gas Flow and Its Influence on the Scale Accumulation in the Steel Slab Pusher-type Reheating FurnaceISIJ International, 2003
- THREE-DIMENSIONAL ANALYSIS OF THE WALKING-BEAM-TYPE SLAB REHEATING FURNACE IN HOT STRIP MILLSNumerical Heat Transfer, Part A: Applications, 2000
- Prediction of Transient Slab Temperature Distribution in the Re-heating Furnace of a Walking-beam Type for Rolling of Steel Slabs.ISIJ International, 2000