Flaw strength distributions and statistical parameters for ceramic fibers: The normal distribution
- 4 May 2012
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review E
- Vol. 85 (5) , 051106
Abstract
The present paper investigates large sets of ceramic fibre failure strengths (500 to 1000 data) produced using tensile tests on tows that contained either 500 or 1000 filaments. The probability density function was determined through acoustic emission monitoring which allowed detection and counting of filament fractures. The statistical distribution of filament strengths was described using the normal distribution. The Weibull equation was then fitted to this normal distribution for estimation of statistical parameters. A perfect agreement between both distributions was obtained, and a quite negligible scatter in statistical parameters was observed, as opposed to the wide variability that is reported in the literature. Thus it was concluded that flaw strengths are distributed normally and that the statistical parameters that were derived are the true ones. In a second step, the conventional method of estimation of Weibull parameters was applied to these sets of data and, then, to subsets selected randomly. The influence of other factors involved in the conventional method of determination of statistical parameters is discussed. It is demonstrated that selection of specimens, sample size, and method of construction of so-called Weibull plots are responsible for statistical parameters variability.Keywords
This publication has 26 references indexed in Scilit:
- Statistical variability in the strength and failure strain of aramid and polyester yarnsJournal of Materials Science, 1994
- Thermal Stress Failure of Ceramics under Repeated Rapid HeatingsJournal of the American Ceramic Society, 1991
- The Concept of Filament Strength and the Weibull ModulusJournal of Testing and Evaluation, 1989
- Strength Distribution of Reinforcing Fibers in a Nicalon Fiber/Chemically Vapor Infiltrated Silicon Carbide Matrix CompositeJournal of the American Ceramic Society, 1989
- Evaluation of single-fibre strength distribution from fibre bundle strengthJournal of Materials Science, 1988
- Statistical Approaches to Failure for Ceramic Reliability AssessmentJournal of the American Ceramic Society, 1988
- The evaluation of the strength distribution of silicon carbide and alumina fibres by a multi-modal Weibull distributionJournal of Materials Science, 1986
- A Statistical Theory for the Fracture of Brittle Structures Subjected to Nonuniform Polyaxial StressesJournal of Applied Mechanics, 1974
- Application of the Theory of Extreme Values in Fracture ProblemsJournal of the American Statistical Association, 1948
- 32—X.—Tensile Tests for Cotton Yarns v.—“The Weakest Link” Theorems on the Strength of Long and of Composite SpecimensJournal of the Textile Institute Transactions, 1926