Experimental and Numerical Investigations on Softening Behavior of POM Under Cyclic Strain-Controlled Loading
- 11 November 2011
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 50 (15) , 1576-1582
Abstract
In this paper, cyclic stress-strain behavior of POM was studied. Fatigue tests were carried out under symmetric uniaxial strain-controlled mode. In this case of loading conditions the material exhibited cyclic softening and with the increase of strain amplitude the total number of cycles to failure reduced dramatically. Additional fatigue tests were further performed under non-symmetrical uniaxial cyclic loading where specimens exhibited relaxation behavior and mean stress reached a zero value in continuous cycles. Experimental tests were performed using an INSTRON 8802 servo-hydraulic machine and the results obtained from the experiments were compared with numerical results. The numerical analysis was carried out by ABAQUS software using the following advanced plasticity models based on Von Mises criterion: isotropic hardening, linear kinematic hardening, and non-linear isotropic/kinematic hardening.Keywords
This publication has 12 references indexed in Scilit:
- Optimization of the Wear Properties of Polyoxymethylene Components Under Injection Process ConditionsPolymer-Plastics Technology and Engineering, 2010
- Multiaxial ratcheting behavior of PTFE at room temperaturePolymer Testing, 2009
- Axial fatigue behaviour of polyamide-6 and polyamide-6 nanocomposites at room temperatureComposites Science and Technology, 2008
- Steady ratcheting strains accumulation in varying temperature fatigue tests of PMMAMaterials Science and Engineering: A, 2008
- Mean stress/strain effect on fatigue behavior of an epoxy resinInternational Journal of Fatigue, 2007
- Ratcheting behavior of an epoxy polymer and its effect on fatigue lifePolymer Testing, 2007
- Study on Mechanical and Tribological Property of Nanometer ZrO2-filled Polyoxymethylene CompositesPolymer-Plastics Technology and Engineering, 2007
- Study on the Thermal Stabilization Effect of Polyamide on PolyoxymethylenePolymer-Plastics Technology and Engineering, 2006
- Ratcheting behavior of PTFE under cyclic compressionPolymer Testing, 2005
- The effect of cyclic true strain on the morphology, structure, and relaxation behavior of ultra high molecular weight polyethylenePolymer, 2001