Design and Measurement of a Terahertz Double Staggered Grating Waveguide With an Arc-Shaped Beam Tunnel
Authors:
- 11 September 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (11) , 4932-4937
Abstract
A millimeter-waveband double staggered grating waveguide (DSGW) with an arc-shaped beam tunnel was previously proposed for sheet beam traveling wave tubes. In this article, the design, fabrication, and cold test of a terahertz band DSGW with an arc-shaped beam tunnel are presented. Simulations demonstrated that the novel DSGW would have a higher coupling impedance and a better beam wave interaction in comparison to the conventional DSGW with a linear-shaped beam tunnel. Beam wave interaction simulations showed that the output power and the electronic efficiency, respectively, increased from $~$420 W to $~$580 W and from 7.0% to 9.3% at 240 GHz. These two kinds of DSGWs were fabricated by using the nanocomputer numerical control (CNC) milling and wire cutting techniques, and their performances were cold tested by using a vector network analyzer. The measurement results were in good agreement with the simulations and demonstrated that both the traditional and novel DSGWs achieved a wide frequency bandwidth of $~$40 GHz (0.22-0.26 THz) with a transmission coefficient S₂₁ better than -2.7/-3.0 dB and a reflection coefficient S₁₁ lower than -13.0/-15.7 dB, respectively.Keywords
Funding Information
- National Natural Science Foundation of China (61901277)
- Young Innovative Talents Foundation of Guangdong University (2018KQNCX215)
- Science and Technology Foundation of Shenzhen (JCYJ20180305124406470)
- Shenzhen University (2018046)
This publication has 20 references indexed in Scilit:
- Mechanical Design and Manufacturing of W-Band Sheet Beam KlystronIEEE Transactions on Electron Devices, 2017
- Performance of a Nano-CNC Machined 220-GHz Traveling Wave Tube AmplifierIEEE Transactions on Electron Devices, 2017
- Nano-CNC Machining of Sub-THz Vacuum Electron DevicesIEEE Transactions on Electron Devices, 2016
- THz Backward-Wave Oscillators for Plasma Diagnostic in Nuclear FusionIEEE Transactions on Plasma Science, 2016
- An Improved Slow-Wave Structure for the Sheet-Beam Traveling-Wave TubeIEEE Transactions on Electron Devices, 2016
- Ultrawideband Coalesced-Mode Operation for a Sheet-Beam Traveling-Wave TubeIEEE Transactions on Electron Devices, 2015
- Terahertz Conductivity of Copper SurfacesIEEE Transactions on Terahertz Science and Technology, 2015
- A research of W-band folded waveguide traveling wave tube with elliptical sheet electron beamPhysics of Plasmas, 2012
- 0.22 THz wideband sheet electron beam traveling wave tube amplifier: Cold test measurements and beam wave interaction analysisPhysics of Plasmas, 2012
- Sever design and full model particle-in-cell simulation analysis for a 220 GHz ultra wideband TWTA2011