Design of Thermal Barrier Coatings Thickness for Gas Turbine Blade Based on Finite Element Analysis
Open Access
- 1 January 2017
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2017 (1)
Abstract
Thermal barrier coatings (TBCs) are deposited on the turbine blade to reduce the temperature of underlying substrate, as well as providing protection against the oxidation and hot corrosion from high temperature gas. Optimal ceramic top‐coat thickness distribution on the blade can improve the performance and efficiency of the coatings. Design of the coatings thickness is a multiobjective optimization problem due to the conflicts among objectives of high thermal insulation performance, long operation durability, and low fabrication cost. This work developed a procedure for designing the TBCs thickness distribution for the gas turbine blade. Three‐dimensional finite element models were built and analyzed, and weighted‐sum approach was employed to solve the multiobjective optimization problem herein. Suitable multiregion top‐coat thickness distribution scheme was designed with the considerations of manufacturing accuracy, productivity, and fabrication cost.Keywords
Funding Information
- National Natural Science Foundation of China (11472204, 11602188)
This publication has 32 references indexed in Scilit:
- Interfacial delamination of double-ceramic-layer thermal barrier coating systemCeramics International, 2014
- Numerical study on interfacial delamination of thermal barrier coatings with multiple separationsSurface and Coatings Technology, 2014
- A combined interface element to simulate interfacial fracture of laminated shell structuresComposites Part B: Engineering, 2014
- Comparison of microstructure and mechanical properties of plasma-sprayed nanostructured and conventional yttria stabilized zirconia thermal barrier coatingsCeramics International, 2013
- Local stress around cap-like portions of anisotropically and nonuniformly grown oxide layer in thermal barrier coating systemJournal of Materials Science, 2013
- Thermoelastic Characteristics in Thermal Barrier Coatings with a Graded Layer between the Top and Bond CoatsMathematical Problems in Engineering, 2013
- Investigation of blade failure in a gas turbineJournal of Mechanical Science and Technology, 2010
- Fracture toughness measurements of plasma-sprayed thermal barrier coatings using a modified four-point bending methodSurface and Coatings Technology, 2010
- Ceramic materials for thermal barrier coatingsJournal of the European Ceramic Society, 2004
- Thermal Barrier Coatings for Gas-Turbine Engine ApplicationsScience, 2002