A Study of Variable Cell Spacings to the Heat Transfer Efficiency of Air-Cooling Battery Thermal Management System
Open Access
- 24 November 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11155
Abstract
The air-cooling battery thermal management system has been widely adopted as the thermal management device for power accumulators on electric vehicles nowadays. To improve the system heat transfer coefficient with the minimum rise in cost, this study modified conventional rectangular cell arrangements for 21,700 cylindrical cell battery packs with two approaches: 1. increase the vertical spacings; 2. convert constant vertical spacings to gradient vertical spacings. The results show that smaller vertical spacings are beneficial to the overall cooling performances of the constant vertical spacings designs at almost all flow rates. The gradient vertical spacing design with larger spacing could deliver better temperature uniformity, while the one with smaller spacings could suppress the maximum temperature more efficiently at higher flow rates. However, the total battery pack volume of Design 7 (the largest gradient vertical spacing design) is 7.5% larger than the conventional design.Keywords
Funding Information
- Australian Research Council (LP170100879)
This publication has 35 references indexed in Scilit:
- Experimental and modeling study of controller-based thermal management of battery modules under dynamic loadsInternational Journal of Heat and Mass Transfer, 2016
- Numerical study on the thermal performance of a composite board in battery thermal management systemApplied Thermal Engineering, 2016
- Performance assessment and optimization of a heat pipe thermal management system for fast charging lithium ion battery packsInternational Journal of Heat and Mass Transfer, 2016
- The numerical investigation of nanofluid based cylinder battery thermal management using lattice Boltzmann methodInternational Journal of Heat and Mass Transfer, 2015
- Thermal management of cylindrical power battery module for extending the life of new energy electric vehiclesApplied Thermal Engineering, 2015
- Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangementsApplied Thermal Engineering, 2015
- Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteriesJournal of Power Sources, 2013
- A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehiclesJournal of Power Sources, 2013
- Accurate electrical battery model capable of predicting runtime and I-V performanceIEEE Transactions on Energy Conversion, 2006
- Battery thermal models for hybrid vehicle simulationsJournal of Power Sources, 2002