Investigation the effect of electron beam melting parameters on overhang structure deformation
- 28 October 2021
- journal article
- research article
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (10) , 1586-1593
Abstract
Electron beam melting (EBM) is a new and rapidly developing metal additive manufacturing (AM) technology. The unique capabilities of EBM have opened the door for this technology in high-performance applications such as medical implants, aerospace, automotive, etc. However, the building of overhang surfaces without support structure leads to dross formation, distortions and warping. Using the support structures is the solution to avoid the mentioned problems, but increased support structure leads to increased use of materials, and post-processing time, which eventually increases the costs of the final process. This study aims to investigate the effect build parameters EBM process on the warping deformation. The main process parameters are considered and evaluated. The results indicate that the process parameter play a role in overhang structure warping deformations. The minimum deformation (0.28 mm) is resulted with 15 mA current, 4530 mm/s scan speed, 3 mm focus offset and 0.3 mm line offset.Keywords
This publication has 14 references indexed in Scilit:
- Manufacturability of Overhanging Holes Using Electron Beam MeltingMetals, 2018
- Effects of Processing Parameters on Surface Roughness of Additive Manufactured Ti-6Al-4V via Electron Beam MeltingMaterials, 2017
- Additive manufacturing of biomedical devices: an overviewMaterials Technology, 2017
- Characterization of the strength of support structures used in powder bed fusion additive manufacturing of Ti-6Al-4VAdditive Manufacturing, 2017
- Microstructure and mechanical properties of open cellular Ti–6Al–4V prototypes fabricated by electron beam melting for biomedical applicationsMaterials Technology, 2016
- Process window for electron beam melting of Ti-6Al-4VPowder Metallurgy, 2015
- Laser additive manufacturing of metallic components: materials, processes and mechanismsInternational Materials Reviews, 2012
- Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies—Electron Beam Melting and Laser Beam MeltingMaterials, 2011
- Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam meltingMaterials Science and Engineering: A, 2008
- Production of titanium alloys for advanced aerospace systems by powder metallurgyMaterials Research, 2005