Cyclic Behavior of High-Strength Lightweight Concrete Exterior Beam-Column Connections Reinforced with GFRP
Open Access
Abstract
Using lightweight reinforced concrete beams with glass fiber bars (GFRP) is one approach for achieving the requirement seismic design idea of “strong-columns weak-beams”. Twelve full-scale normal-strength concrete (NC with fc` = 32 MPa) and high-strength lightweight concrete (HSLWC with fc` = 42, 49 and 52 MPa) exterior beam-column joints have been tested under cyclic loadings. The beams were reinforced with conventional steel bars (CS) and GFRP using steel fibers (SF). The experimental joint shear force was compared with that estimated by some international codes such as the American Concrete Institute (ACI-19), the Egyptian code (ECP-07), and the New Zealand Code (NZS-06). Nonlinear finite element analysis (ABAQUS) was carried out. In the present study, three main parameters were explored (1) HSLWC, (2) GFRP ratios equal to 0.70%, 1.03% and 1.37%, (3) SF ratios equal to 0.0%, 0.75% and 1.50%. The findings of the experiment revealed that increasing the concrete strength from NC with conventional steel bars to high-strength lightweight concrete HSLWC (fc` = 42 MPa) with the same ratio of GFRP bars enhanced the first cracking load by about 25%. Increasing the SF ratio to 1.50% enhanced the failure load by 18–24% when compared with non-fiber specimens. The predicted joint shear strength estimated using the equations of the ACI 318-19 and ECP-07 are conservative for HSLWC exterior beam-column connection reinforced with GFRP bars but the predicted joint shear strength by using the equations of the NZS-07 is on the borderline for some cases. The finite element program ABAQUS can be used successfully to forecast the behavior of HSLWC beam-column connections reinforced with GFRP under seismic loadings.Keywords
This publication has 18 references indexed in Scilit:
- Seismic behavior of concrete moment frame reinforced with GFRP barsComposites Part B: Engineering, 2019
- Anchorage Performance of GFRP Headed and Bent Bars in Beam-Column Joints Subjected to Seismic LoadingJournal of Composites for Construction, 2018
- Seismic Behavior of Exterior GFRP-RC Beam–Column Connections: Analytical StudyJournal of Composites for Construction, 2018
- Shear Capacity of Exterior Beam-Column Joints Reinforced with GFRP Bars and StirrupsJournal of Composites for Construction, 2016
- Seismic Behavior of Beam-Column Joints Reinforced with GFRP Bars and StirrupsJournal of Composites for Construction, 2011
- Seismic flexural behavior of concrete connections reinforced with CFRP bars and gridsComposite Structures, 2011
- Experimental Investigation on the Seismic Performance of Beam-Column Joints Reinforced with GFRP BarsJournal of Earthquake Engineering, 2011
- Reinforced concrete beam–column joints with crossed inclined bars under cyclic deformationsEarthquake Engineering & Structural Dynamics, 2008
- Lateral load response of high performance fiber reinforced concrete beam–column jointsConstruction and Building Materials, 2005
- SEISMIC REHABILITATION OF BEAM-COLUMN JOINTS USING FRP LAMINATESJournal of Earthquake Engineering, 2001