Engine Torque Nonuniformity Evaluation Using Instantaneous Crankshaft Speed Signal
Authors:
- 1 October 2003
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 125 (4) , 1050-1058
Abstract
The paper presents the development of a methodology for evaluating the torque nonuniformity between the various cylinders of an internal combustion engine (ICE). This nonuniformity can be due, for example, to pathological operating conditions such as misfires or misfuels, as well as to other abnormal operating conditions. Between the nominal torque production and the one corresponding to the absence of combustion there exist, in fact, a series of possible intermediate conditions. Each of them corresponds to a value of produced torque that lies between the nominal value and the one corresponding to the lack of combustion (due for example to statistical dispersion in manufacturing or aging in the injection system). The diagnosis of this type of nonuniformity is a very important issue in today’s engine control strategies design. The use of the developed methodology should in fact allow the control strategy to adopt the appropriate interventions if the diagnosed nonuniformity is related to different behavior of the injectors. In order to evaluate this torque production variability between the various cylinders, information hidden in the instantaneous crankshaft speed fluctuations has been processed using a suitable methodology. The procedure has been validated running a supercharged 2.0 liters V6 engine, and a 1.2 liters L4 engine, in a test cell. During the tests, the in-cylinder pressure signal has been acquired together with the instantaneous engine speed, in order to determine a correlation between speed fluctuations and the indicated torque produced by each cylinder. The actual cylinder-by-cylinder torque nonuniformity can then be evaluated on-board by processing engine speed. The procedure is able to diagnose the absence of combustion (due for example to a misfire or a misfuel) as well as abnormal combustions that do not necessarily involve lack of combustion, with, the accuracy needed for on-board use. Control interventions to injection and ignition time commands of one or more cylinders should, in most cases, be able to re-establish torque production uniformity.Keywords
This publication has 12 references indexed in Scilit:
- Fast Algorithm for On-Board Torque EstimationSAE International Journal of Advances and Current Practices in Mobility, 1999
- Enhanced Engine Position Acquisition & TreatmentSAE International Journal of Advances and Current Practices in Mobility, 1999
- Engine and Load Torque Estimation with Application to Electronic Throttle ControlSAE International Journal of Advances and Current Practices in Mobility, 1998
- Misfire Pattern Recognition in High Performance SI 12-Cylinder EngineSAE International Journal of Advances and Current Practices in Mobility, 1998
- Advanced Engine Misfire Detection for SI-EnginesSAE International Journal of Advances and Current Practices in Mobility, 1997
- Misfire Index Design by Statistical Signal Processing in High Performance EnginesIFAC Proceedings Volumes, 1996
- Misfire Detection in a High-Performance Engine by the Principal Component Analysis ApproachSAE International Journal of Advances and Current Practices in Mobility, 1996
- Measurement of Engine Misfire in the Lamborghini 533 V-12 Engine Using Crankshaft Speed FluctuationsSAE International Journal of Advances and Current Practices in Mobility, 1995
- Misfire Detection by Evaluating Crankshaft Speed - A Means to Comply with OBDIISAE International Journal of Advances and Current Practices in Mobility, 1993
- Methods of On-Board Misfire DetectionSAE International Journal of Advances and Current Practices in Mobility, 1990