Residual ultimate strength of large opening box girder with pitting corrosion damage under torsion and bending loads
- 13 October 2022
- journal article
- research article
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 18 (11) , 1559-1581
Abstract
In this paper, the residual ultimate strength of large opening box girder with pitting corrosion under combined loads is investigated by ABAQUS software. A primary investigation was first conducted to compare the influences of corrosion types. Afterwards, effects of some studied parameters including the depth, density, volume, and location of the pit, which may affect the ultimate strength, were analyzed based on a series of FE results. It was concluded that the relative corroded volume loss has a non-negligible effect on the residual ultimate strength. For torsion and sagging cases, the side plates' pits significantly reduce the ultimate strength. For the hogging case, the effect of bottom plate pitting on the ultimate strength should be paid attention to. The interaction relationship between torsion and bending moment was analyzed. An interaction equation is proposed for evaluating the ultimate strength of large opening box girders with pitting damage under combined loads.Keywords
Funding Information
- National Key Research and Development Program of China (2019YFD0901003)
- the Natural Science Foundation of Shandong Provincial (ZR2020ME266)
- the National Natural Science Foundation of China-Shandong (U1706223)
This publication has 39 references indexed in Scilit:
- Effect of welding-induced residual stress and distortion on ship hull girder ultimate strengthMarine Structures, 2012
- Analysis of plate deflections during ultimate strength experiments of corroded box girdersThin-Walled Structures, 2012
- Ultimate capacity of rectangular plates with partial depth pits under uniaxial loadsMarine Structures, 2012
- Experimental assessment of the ultimate strength of a box girder subjected to severe corrosionMarine Structures, 2011
- Tests on ultimate strength of hull box girders made of high tensile steelMarine Structures, 2009
- Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bendingJournal of Marine Science and Technology, 2006
- Effect of pitting corrosion on strength of web plates subjected to patch loadingThin-Walled Structures, 2006
- An experimental study of ultimate torsional strength of a ship-type hull girder with a large deck openingMarine Structures, 2003
- Analysis of Ultimate Strength of Stiffened Rectangular Plate (4th Report)Journal of the Society of Naval Architects of Japan, 1983
- An Ultimate Transverse Strength Analysis of Ship StructureJournal of the Society of Naval Architects of Japan, 1974