Head-Column Field-Amplified Sample Stacking in Binary System Capillary Electrophoresis: A Robust Approach Providing over 1000-Fold Sensitivity Enhancement
Authors:
- 1 August 1996
- journal article
- research article
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 68 (15) , 2523-2532
Abstract
Effective electrokinetic field-amplified sample injection occurring at the capillary inlet from a sample volume equivalent exceeding that of the capillary up to 10-fold is described and demonstrated to provide over 1000-fold sensitivity enhancement. Successful application of this head-column field-amplified sample stacking approach to the analysis of positively chargeable, hydrophobic compounds in binary system capillary electrophoresis is shown to require an initially introduced low-conductivity zone (water plug) of >1 mm length, a sample injection voltage + (50−100 μM) provides the highest sensitivity for analysis of positively chargeable model substances, including amiodarone and desethylamiodarone. Solutes present at the nanomolar level can thereby be accumulated from a sample volume equivalent of about 4 μL (with injection of about 20 nL of sample solvent into the capillary) and measured by UV absorption detection. To prevent disturbances caused by electrolysis, sample vials should be employed only once. The data obtained further show that quantitation can be reliably performed using internal calibration based on peak height (RSDs for inter- and intraday determinations are on the 2% level). However, due to variation of the roughness of the capillary walls and cuts, the time interval between operational steps, and trace adsorption onto the capillary walls, the length of the water zone drawn by capillary action on the inlet side is not constant, and external calibration therefore cannot be employed for quantitation.Keywords
This publication has 28 references indexed in Scilit:
- Application of Capillary Electrophoresis with Laser-Induced Fluorescence Detection for Determination of Methylmalonic Acid in Human SerumAnalytical Chemistry, 1995
- Sensitivity enhancement and second-dimensional information from solid phase extraction-capillary electrophoresis of entire high-performance liquid chromatography fractionsElectrophoresis, 1995
- Improvement in detection limits for the determination of paralytic shellfish poisoning toxins in shellfish tissues using capillary electrophoresis/electrospray mass spectrometry and discontinuous buffer systemsAnalytical Chemistry, 1994
- On‐column ITP focusing in CZE for the quantitation of low‐molecular‐weight basic solutes in biological samplesJournal of Microcolumn Separations, 1994
- Large volume stacking of anions in capillary electrophoresis using an electroosmotic flow modifier as a pumpAnalytical Chemistry, 1993
- Optical improvements of a Z-shaped cell for high-sensitivity UV absorbance detection in capillary electrophoresisAnalytical Chemistry, 1993
- Determination of chlorite and chlorate in chlorinated and chloraminated drinking water by flow injection analysis and ion chromatographyAnalytical Chemistry, 1992
- Thermal degradation of a thermolabile Serratia marcescens nuclease using capillary electrophoresis with stacking conditionsAnalytical Chemistry, 1992
- Electrophoresis in fused-silica capillaries: the influence of organic solvents on the electroosmotic velocity and the .zeta. potentialAnalytical Chemistry, 1991
- Application of sample stacking to gravity injection in capillary electrophoresisJournal of Microcolumn Separations, 1991