Influence of single and dual particle reinforcements on the corrosion behavior of aluminum alloy based composites
- 15 March 2016
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 232 (6) , 520-532
Abstract
This article presents the results of a study on the corrosion characteristics of the single and dual particle reinforced aluminum alloy 6063 based composites. The reinforcements of silicon carbide and zircon sand were utilized to fabricate the composites by stir casting technique. The influence of reinforcement and their weight percentage on the hardness variations was investigated. The electrochemical tests in sodium chloride solution were conducted to study the corrosion performance of reinforced composites and base alloy. From the corrosion analysis, it was observed that the single particle reinforcement offered better solution on enhancing the corrosion resistance of base aluminum alloy in comparison with dual particle reinforced composites. In the single particle reinforced composites, addition of zircon sand exhibited increased corrosion resistance, when compared to silicon carbide reinforced composites. The governing mechanism behind increased corrosion resistance was found to be the absence of galvanic coupling between the elemental compounds and the corrosive media at particle–matrix interface. The scanning electron microscopy of composites was performed to analyze corrosion mechanism and correlated well with the corrosion behavior.Keywords
This publication has 30 references indexed in Scilit:
- Influence of stirring speed and stirring time on distribution of particles in cast metal matrix compositeJournal of Materials Processing Technology, 2006
- Influence of stirring speed on the synthesis of Al/SiC based functionally gradient materialsComposite Structures, 2002
- Correlation between tensile and indentation behavior of particle-reinforced metal matrix composites: an experimental and numerical studyActa Materialia, 2001
- Effect of limited matrix–reinforcement interfacial reaction on enhancing the mechanical properties of aluminium–silicon carbide compositesActa Materialia, 2001
- Internal stress and microstructure of SiC reinforced aluminium alloy 2014Acta Materialia, 1998
- Interfacial Preferential Dissolution on Silicon Carbide Particulate/Aluminum CompositesCorrosion, 1998
- Corrosion protection of an Al 6092/SiC P metal matrix compositeCorrosion Science, 1997
- Mechanical behavior of cast SiCp-reinforced Al-4.5%Cu-1.5%Mg alloyMaterials Science and Engineering: A, 1996
- The influence of silicon carbide reinforcement on the pitting behaviour of aluminiumCorrosion Science, 1996
- Corrosion behaviour of aluminium-based metal matrix compositesJournal of Materials Science, 1994