A 64-Channel Versatile Neural Recording SoC With Activity-Dependent Data Throughput
Open Access
- 3 November 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 11 (6) , 1344-1355
Abstract
Modern microtechnology is enabling the channel count of neural recording integrated circuits to scale exponentially. However, the raw data bandwidth of these systems is increasing proportionately, presenting major challenges in terms of power consumption and data transmission (especially for wireless systems). This paper presents a system that exploits the sparse nature of neural signals to address these challenges and provides a reconfigurable low-bandwidth event-driven output. Specifically, we present a novel 64-channel low-noise (2.1 $\mu$V$_{\text{rms}}$), low-power (23 $\mu$W per analogue channel) neural recording system-on-chip (SoC). This features individually configurable channels, 10-bit analogue-to-digital conversion, digital filtering, spike detection, and an event-driven output. Each channel’s gain, bandwidth, and sampling rate settings can be independently configured to extract local field potentials at a low data-rate and/or action potentials (APs) at a higher data rate. The sampled data are streamed through an SRAM buffer that supports additional on-chip processing such as digital filtering and spike detection. Real-time spike detection can achieve $\sim$2 orders of magnitude data reduction, by using a dual polarity simple threshold to enable an event driven output for neural spikes (16-sample window). The SoC additionally features a latency-encoded asynchronous output that is critical if used as part of a closed-loop system. This has been specifically developed to complement a separate on-node spike sorting coprocessor to provide a real-time (low latency) output. The system has been implemented in a commercially available 0.35-$\mu$m CMOS technology occupying a silicon area of 19.1 mm$^2$ (0.3 mm$^2$ gross per channel), demonstrating a low-power and efficient architecture that could be further optimized by aggressive technology and supply voltage scaling.
Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/I000569/1, EP/K015060/1, EP/M020975/1)
This publication has 34 references indexed in Scilit:
- System-Level Design of a 64-Channel Low Power Neural Spike Recording SensorIEEE Transactions on Biomedical Circuits and Systems, 2017
- A High Dynamic-Range Neural Recording Chopper Amplifier for Simultaneous Neural Recording and StimulationIEEE Journal of Solid-State Circuits, 2017
- A Fully Integrated Wireless Compressed Sensing Neural Signal Acquisition System for Chronic Recording and Brain Machine InterfaceIEEE Transactions on Biomedical Circuits and Systems, 2016
- A Low-Voltage Chopper-Stabilized Amplifier for Fetal ECG Monitoring With a 1.41 Power Efficiency FactorIEEE Transactions on Biomedical Circuits and Systems, 2015
- A Common Structure Underlies Low-Frequency Cortical Dynamics in Movement, Sleep, and SedationNeuron, 2014
- A Low-Power Programmable Neural Spike Detection Channel With Embedded Calibration and Data CompressionIEEE Transactions on Biomedical Circuits and Systems, 2012
- A Low-Power 32-Channel Digitally Programmable Neural Recording Integrated CircuitIEEE Transactions on Biomedical Circuits and Systems, 2011
- A 1-V 450-nW Fully Integrated Programmable Biomedical Sensor Interface ChipIEEE Journal of Solid-State Circuits, 2009
- A Low-Noise Preamplifier with Adjustable Gain and Bandwidth for Biopotential Recording Applications2007
- Unsupervised Spike Detection and Sorting with Wavelets and Superparamagnetic ClusteringNeural Computation, 2004