Room temperature manufacture of dense NaSICON solid electrolyte films for all-solid-state-sodium batteries
Authors:
Open Access
- 9 June 2023
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science
- Vol. 58 (24) , 10108-10119
Abstract
Sodium (Na) Super-Ionic CONductor (NaSICON) solid electrolyte (SE) powders (Na3Zr2Si2PO4) were prepared by the mixed oxide technique using a planetary ball mill and synthesized via solid-state method at temperatures ranging from 950 to 1200 °C. The powders with 95% pure NaSICON phase were deposited on different substrates via Powder Aerosol Deposition (PAD) at room temperature directly from the powders and fully dense ceramic films were obtained. X-ray diffractometry including Rietveld refinement were carried out on both the calcined powders and the resulting films to determine the crystallographic properties. Subsequently, the electrical properties of the resulting films were characterized and the effect of annealing at temperatures between 100 and 600 °C on the ionic conductivity of NaSICON PAD films was evaluated. Annealed films were measured in the temperature range 50 and 250 °C to calculate the activation energy Ea of the PAD films. Our work demonstrates a successful room temperature deposition of dense NaSICON electrolyte films on different substrates, which is promising for stationary energy storage applications of solid-state-sodium batteries.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (MO1060/45-1)
- Universität Bayreuth
This publication has 63 references indexed in Scilit:
- Corrosion Protection Performance of YSZ Coating on AA7075 Aluminum Alloy Prepared by Aerosol DepositionJournal of the Electrochemical Society, 2012
- Growth Process of α‐Al2O3 Ceramic Films on Metal Substrates Fabricated at Room Temperature by Aerosol DepositionJournal of the American Ceramic Society, 2011
- Detection of water droplets on exhaust gas sensorsSensors and Actuators B: Chemical, 2010
- Embedded Capacitor Technology Using Aerosol DepositionInternational Journal of Applied Ceramic Technology, 2010
- Formation of zirconia films by aerosol gas deposition method using zirconia powder produced by break-down methodJournal of the Ceramic Society of Japan, 2010
- Aerosol Deposition of Ceramic Thick Films at Room Temperature: Densification Mechanism of Ceramic LayersJournal of the American Ceramic Society, 2006
- Influence of microstructure on the electrical properties of NASICON materialsSolid State Ionics, 2001
- Conductivity measurements on nasicon and nasicon-modified materialsSolid State Ionics, 1999
- Effect of Decomposition on the Densification and Properties of Nasicon Ceramic ElectrolytesJournal of the American Ceramic Society, 1983
- Crystal structures and crystal chemistry in the system Na1+xZr2SixP3−xO12Materials Research Bulletin, 1976