Use of EMFi as a Blood Pressure Pulse Transducer
Authors:
- R. MyllylaRMR. Myllyla
- J. MiettinenJMJ. Miettinen
- 21 November 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 54 (6) , 2505-2512
Abstract
This paper describes and tests two prototype series of pressure transducer arrays based on electromechanical film (EMFi). By offering high (/spl sim/T/spl Omega/) resistance, EMFi is an excellent material for low-current long-term measurement applications. About 50 transducer arrays were designed and tested using different configurations and electrode materials to sense low-frequency pressure pulsations on the radial artery in the wrist. Essential requirements included an adequate linear response in the desired temperature range and uniform quality. Transducer sensitivity was tested as a function of temperature in the range of 25/spl deg/C-45/spl deg/C at varying dc and ac pressures. The average sensitivity of the EMFi used in the transducers proved adequate (/spl sim/2.2mV/mmHg and /spl sim/7 mV/mmHg for normal and high-sensitive films) for the intended purpose. Moreover, EMFi's spectral response covered the required range for biomedical applications, but it was unable to measure static pressure (f/sub 3 dB//spl ap/38 /spl mu/Hz). The sensitivity of the EMFi material was sufficiently constant for measuring blood pressure pulses in the desired range (0-300 mmHg), and the best achieved deviation in sensitivity was /spl plusmn/5.1%. It was also established that in addition to sensitivity and its standard deviation, crosstalk between electrode elements also depends strongly on electrode thickness.Keywords
This publication has 34 references indexed in Scilit:
- Less can be more. Holes in polymers lead to a new paradigm of piezoelectric materials for electret transducersIEEE Transactions on Dielectrics and Electrical Insulation, 2002
- Understanding the role of the gas in the voids during corona charging of cellular electret films - a way to enhance their piezoelectricityJournal of Physics D: Applied Physics, 2001
- Electromechanical modeling and properties of the electret film EMFIIEEE Transactions on Dielectrics and Electrical Insulation, 2001
- Piezo- and pyroelectricity of a polymer-foam space-charge electretJournal of Applied Physics, 2001
- Determination of the actuator sensitivity of electromechanical polypropylene films by atomic force microscopyJournal of Applied Physics, 2000
- Modelling the electromechanical film (EMFi)Journal of Electrostatics, 2000
- Assessment of Arterial Distensibility by Automatic Pulse Wave Velocity MeasurementHypertension, 1995
- A New Method for the Measurement of Spontaneous Motor Activity of Laboratory AnimalsBasic & Clinical Pharmacology & Toxicology, 1992
- Biaxially oriented polypropylene blown films. I: Morphological analysis of orientation in the machine directionPolymer Engineering & Science, 1990
- Electrothermomechanical Film. Part I. Design and CharacteristicsJournal of Macromolecular Science: Part A - Chemistry, 1989