Multivariate optimisation of a novel green microextraction method for Fe (III) determination in environmental samples by FAAS
- 22 June 2020
- journal article
- research article
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 102 (14) , 3243-3254
Abstract
Industrial development has led to increased heavy metal pollution in bodies of water all over the world. Numerous methods are being developed with the aim of detecting and subsequently removing heavy metal ions from water with hopes of reversing pollution. Here, we present a novel and ecological switchable solvent-based liquid phase microextraction (SS-LPME) method that detects Fe (III) in water samples before they can be tested on flame atomic adsorption spectrometry. In this method, 2-(5-Bromo-2-pyridylazo)-5-(diethylamino) phenol was selected as a complexing agent and switchable polarity solvent was formulated with N, N-dimethyl-n-octylamine. Box–Behnken response surface design was used to investigate and optimise factors associated with the extraction recovery. When the optimal conditions were reached, a linear calibration curve was achieved at 0.05–400 µg L−1. The preconcentration factor was 200, the detection limit was 0.015 µg L−1 with the relative standard deviation (RSD) of 2.2% (at 30 µg L−1; n = 8). Water samples and wastewater reference material (SPSWW1) were used to test the applicability and success of the method.Keywords
This publication has 29 references indexed in Scilit:
- Separation and preconcentration of Cu(II), Pb(II), Zn(II), Fe(III) and Cr(III) ions with coprecipitation method without carrier element and their determination in food and water samplesFood Chemistry, 2015
- Adsorption kinetics, isotherms, and thermodynamic studies for the adsorption of Pb2+ and Hg2+ metal ions from aqueous medium using Ti(IV) iodovanadate cation exchangerIonics, 2015
- Separation of toxic Pb2+ metal from aqueous solution using strongly acidic cation-exchange resin: analytical applications for the removal of metal ions from pharmaceutical formulationDesalination and Water Treatment, 2015
- Coprecipitation for the Determination of Copper(II), Zinc(II), and Lead(II) in Seawater by Flame Atomic Absorption SpectrometryAnalytical Letters, 2015
- A novel ligand for cloud point extraction to determine gold content in ore samplesEnvironmental Chemistry Letters, 2014
- Room Temperature Ionic Liquid-Based Dispersive Liquid Phase Microextraction for the Separation/Preconcentration of Trace Cd2+ as 1-(2-pyridylazo)-2-naphthol (PAN) Complex from Environmental and Biological Samples and Determined by FAASBiological Trace Element Research, 2013
- Hexavalent chromium removal from aqueous medium by activated carbon prepared from peanut shell: Adsorption kinetics, equilibrium and thermodynamic studiesChemical Engineering Journal, 2012
- Response Surface Methodology2010
- Chemically modified attapulgite with asparagine for selective solid-phase extraction and preconcentration of Fe(III) from environmental samplesAnalytica Chimica Acta, 2010
- Preconcentration extractive separation, speciation and spectrometric determination of iron(III) in environmental samplesMicrochemical Journal, 2003