Evaporator Optimization of Refrigerator Systems Using Quality Analysis
Open Access
Abstract
In this study, evaporator optimization, via both experimental and simulation methods was conducted. To evaluate the evaporator performance, under the optimal system, the compressor operating time and the effects of oil on the refrigerator system were studied. If the temperature of the refrigerator chamber reaches the setting value, the compressor stops working and it leads to the temperature of the refrigerator chamber slowly increasing, due to the heat transfer to the ambient. When the refrigerator temperature is out of the setting range, the compressor works again, and the refrigerator repeats this process until the end of its life. These on/off period can be controlled through the compressor piston movement. To determine the optimal compressor operating conditions, experiments of monthly power consumption were conducted under various compressor working times and the lowest power consumption conditions was determined when the compressor worked continuously. Lubricating oil, the refrigerator system, using oil, also influenced the system performance. To evaluate the effect of oil, oil eliminated and oil systems were compared based on cooling capacity and power consumption. The cooling capacity of the oil eliminated system was 2.6% higher and the power consumption was 3.6% lower than that of the oil system. After determining the optimal operating conditions of the refrigerator system, visualization experiments and simulations were conducted to decide the optimal evaporator and the conventional evaporator size can be reduced by approximately 2.9%.Keywords
Funding Information
- Korea Institute of Energy Technology Evaluation and Planning (20184030202060)
- Ministry of Trade, Industry and Energy (20184010201660)
This publication has 30 references indexed in Scilit:
- Effect of pressure ratio and oil viscosity on rotary compressor efficiencyJournal of Mechanical Science and Technology, 2018
- Performance analysis of a household refrigerator integrating a PCM heat exchangerApplied Thermal Engineering, 2017
- Leakage characteristics and an updated volumetric efficiency prediction model of rolling piston type rotary compressor for small capacity air-conditioner and heat pump applicationsApplied Thermal Engineering, 2017
- Comparison of heat transfer models for reciprocating compressorApplied Thermal Engineering, 2016
- Flow pattern visualization and heat transfer characteristics of R-134a during evaporation inside a smooth tube with different tube inclinationsInternational Communications in Heat and Mass Transfer, 2014
- An experimental and numerical study on an inherent capacity modulated linear compressor for home refrigeratorsInternational Journal of Refrigeration, 2011
- Determination of the compressor optimal working conditionsApplied Thermal Engineering, 2009
- A Novel Strategy of Efficiency Control for a Linear Compressor System Driven by a PWM InverterIEEE Transactions on Industrial Electronics, 2008
- Study of the thermal behavior of a latent heat cold storage unit operating under frosting conditionsEnergy Conversion and Management, 2003
- A computer simulation of a rotary compressor for household refrigeratorsApplied Thermal Engineering, 1997