High strength induced wide band gap formations in additively manufactured cubic metamaterial
Authors:
- 13 June 2024
- journal article
- research article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 33 (7) , 075019
Abstract
Strength and band gap are the two basic physical features of the cubic metamaterial. How to design band gap characteristics with high strength of structure is the key for the further industrial application in vibration control of the cubic metamaterial. Here a cubic metamaterial is designed by optimal selection of crystal orientation angle to obtain wide band gaps with high strength. The prototype samples were fabricated using advanced additive manufacturing technology to tensile-pressure experiments and sine frequency sweep experiment, thereby demonstrating the validity of the obtained results. Results indicated that the normalized bandwidth of simple cubic (SC) metamaterials is 0.47 and the ultimate strength is 25.99 MPa. The normalized bandwidth is increased by 3.1 times and 47 times higher than that of the metamaterials of face-centered cubic (FCC) and body-centered cubic (BCC). Its ultimate strength is increased by 3.5 times and 6.7 times. The static simulation results revealed that the maximum mises stress values of SC, FCC, and BCC metamaterials were 1.71, 10.49, and 31.40 MPa respectively. The attenuation amplitude of the elastic wave measured by experiment is 80 dB, which is consistent with the simulation results. The bandwidths of cubic metamaterials exhibit a positive correlation with their strength. The variation in crystal orientation angles plays a crucial role in elucidating the underlying mechanism behind the positive correlation between the strength and the band gap. The further buckling analysis of SC metamaterial with high strength and wide bandgap characteristics reveals that the negative Poisson’s ratio structure experiences a reduction in bandwidth and strength as buckling deformation intensifies.Keywords
Funding Information
- National Natural Science Foundation of China (12372191)
This publication has 67 references indexed in Scilit:
- Multiscale modeling of functionally graded shell lattice metamaterials for additive manufacturingEngineering with Computers, 2023
- Incorporating Manufacturing Process Simulations to Enhance Performance Predictions of Injection Moulded MetamaterialsJournal of Vibration Engineering & Technologies, 2023
- Statics, vibration, and buckling of sandwich plates with metamaterial cores characterized by negative thermal expansion and negative Poisson’s ratioApplied Mathematics and Mechanics, 2023
- Additive Manufacturing of Composite Foam Metamaterial Springs for Vibration IsolationAdvanced Engineering Materials, 2023
- A novel 3D-printable tensegrity-inspired metamaterial enabling dynamic attenuationInternational Journal of Mechanics and Materials in Design, 2023
- Micro‐Scale Mechanical Metamaterial with a Controllable Transition in the Poisson's Ratio and Band Gap FormationAdvanced Materials, 2023
- Plate-based cylinder metamaterial with negative Poisson’s ratio and outstanding mechanical performanceScience China Technological Sciences, 2023
- A review on additive manufacturing of wave controlling metamaterialThe International Journal of Advanced Manufacturing Technology, 2022
- Mass inertia moment-based design of band gap characteristics in zigzag beam-supported stepped phononic crystalsApplied Physics A, 2022
- Dynamics analysis and design of metamaterial beams with multiple half-sine wavesApplied Acoustics, 2022