The Friction and Wear Properties of Metal-Doped DLC Films under Current-Carrying Condition
- 6 August 2019
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 62 (6) , 1119-1128
Abstract
In an effort to improve the surface properties of electrical contact materials in terms of high friction coefficient and wear rate, diamond-like carbon (DLC) films containing different metal elements were prepared on stainless steel substrates using an unbalanced magnetron sputtering system. In the present study, the effect of current-carrying on DLC film, Cu-doped DLC film (Cu/DLC), and Ti-doped DLC film (Ti/DLC) is reported. The structure and mechanical properties of the films were characterized systematically by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Raman spectra; these methods were also used to analyze the initial surface of the films. Moreover, the tribological behaviors of the films sliding against AISI 52100 steel with and without an electric current (1 A) applied were investigated using a tribometer with ball-on-disc configuration in an atmospheric environment. The results demonstrated that the friction coefficients of DLC and Cu/DLC under current-carrying condition were decreased, whereas Ti/DLC showed opposite experimental results. The wear rate of the films with a current was higher than that without a current. Therefore, this study is meaningful to understand the tribological behaviors of microelectromechanical systems.Keywords
This publication has 36 references indexed in Scilit:
- Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contactTribology International, 2018
- Rectifier Efficiency [Enigmas, etc.]IEEE Microwave Magazine, 2017
- Microstructures and mechanical properties of an a-C:N film as the interlayer and the outmost layer of a DLC-deposited Ti bio-alloyCeramics International, 2017
- Synthesis and characterization of CrCN–DLC composite coatings by cathodic arc ion-platingNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2013
- Structural and Electronic Characterization of Nanocrystalline Diamondlike Carbon Thin FilmsACS Applied Materials & Interfaces, 2012
- Tribological and electric-arc behaviors of carbon/copper pair during sliding friction process with electric current appliedTransactions of Nonferrous Metals Society of China, 2011
- Wear mechanism of aluminum–stainless steel composite conductor rail sliding against collector shoe with electric currentWear, 2007
- Lubrication mechanisms of a sliding contact by simultaneous action of electric current and magnetic fieldWear, 1999
- Multilayer composite ceramicmetal-DLC coatings for sliding wear applicationsTribology International, 1996
- Early Detection and Warning of Excessive Carbon Brush SparkingIEEE Transactions on Power Apparatus and Systems, 1972