Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts
Open Access
- 4 April 2016
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2016, 1-14
Abstract
A full factorial design technique is used to investigate the effect of machining parameters, namely, spindle speed, depth of cutand table feed rateon the obtained surface roughness (and) during face milling operation of high strength steel. A second-order regression model was built using least squares method depending on the factorial design results to approximate a mathematical relationship between the surface roughness and the studied process parameters. Analysis of variance was conducted to estimate the significance of each factor and interaction with respect to the surface roughness. For, the results show that spindle speed, depth of cut, and table feed rate have a significant effect on the surface roughness in both linear and quadratic terms. There is also an interaction between depth of cut and feed rate. It also appears that feed rate has the greatest effect on the data variation followed by depth of cut. For, the results show that the table feed rate is the most effective factor followed by the depth of cut, while the spindle speed had a significant small effect only in its quadratic term. The conditions of minimumandare identified through least square optimization. Moreover, multiobjective optimization for minimizingand maximizing metal removal rateis conducted and the results are presented.
Keywords
Funding Information
- King Saud University
This publication has 10 references indexed in Scilit:
- Comparative Assessment of Wiper and Conventional Carbide Inserts on Surface Roughness in the Turning of High Strength SteelJournal of Materials Science Research, 2015
- Sustainable machining of high temperature Nickel alloy – Inconel 718: part 2 – chip breakability and optimizationJournal of Cleaner Production, 2015
- Experimental research of face mill wear effect to flat surface roughnessJournal of Friction and Wear, 2014
- Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated insertsMeasurement, 2014
- An Investigation of Optimum Cutting Conditions in Face Milling Aluminum Semi Solid 2024 Using Carbide ToolEnergy Procedia, 2013
- An Investigation of Optimum Cutting Conditions in Face Milling Nodular Cast Iron FCD 400 Using Carbide ToolInternational Journal of Materials, Mechanics and Manufacturing, 2013
- Optimization of cutting conditions for surface roughness in CNC end millingInternational Journal of Precision Engineering and Manufacturing, 2011
- Effect of shielded-electrode wet welding conditions on diffusion hydrogen content in deposited metalWelding International, 2011
- Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steelThe International Journal of Advanced Manufacturing Technology, 2010
- A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysisProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008