Multi-Objective Optimization of Injection-Molded Car Door Handles Using Taguchi Method and Grey Relational Analysis
Open Access
- 10 June 2025
- journal article
- Published by Penerbit Universiti Malaysia Perlis in Advanced and Sustainable Technologies (ASET)
- Vol. 4 (1) , 97-112
Abstract
Injection-molded automotive components, such as exterior car door handles, often suffer from defects like volumetric shrinkage, residual stress, and deflection, impacting their structural integrity and aesthetic quality. Traditional optimization methods struggle to balance the multiple conflicting objectives involved in material selection, mold design, and process parameters. This study addresses these challenges by integrating the Taguchi method and Grey Relational Analysis (GRA) for multi-objective optimization in Moldflow simulations. Key process parameters, including melt temperature, injection pressure, and cooling time, were systematically analyzed and optimized to reduce defects. Simulation trials using Acrylonitrile Butadiene Styrene (ABS), Polypropylene (PP), and Polycarbonate (PC) demonstrated notable improvements, achieving a 56.4% reduction in weld-line width and a 68.9% decrease in sink-mark depth. These results highlight the effectiveness of the combined Taguchi-GRA approach in enhancing injection molding efficiency, improving product quality, and ensuring component longevity. The study establishes a robust foundation for further research on optimizing complex injection-molded automotive parts and exploring advanced material formulations to meet stringent industry standards.Keywords
This publication has 35 references indexed in Scilit:
- Entropic barrier theory of polymer meltingJournal of Polymer Science, 2023
- Effect of injection molding conditions on the properties of polyamide 6/calcium carbonate nanocompositeJournal of Applied Polymer Science, 2023
- MOCOVIDOA: a novel multi-objective coronavirus disease optimization algorithm for solving multi-objective optimization problemsNeural Computing and Applications, 2023
- A new approach to dynamic forecasting of cavity pressure and temperature throughout the injection molding processPolymer Engineering & Science, 2022
- Constitutive modeling of injection‐molded short‐fiber composites: Characterization and model applicationJournal of Applied Polymer Science, 2020
- Injection molding manufacturing process: review of case-based reasoning applicationsJournal of Intelligent Manufacturing, 2019
- The influence of the type of polypropylene and the length of the flow path on the structure and properties of injection molded parts with the weld linesPolymer Engineering & Science, 2019
- Creating material data for thermoset injection molding simulation processPolymer Testing, 2019
- Residual wall thickness of water‐powered projectile‐assisted injection molding pipesPolymer Engineering & Science, 2018
- Effect of process parameters on the adhesion strength in two‐component injection molding of thermoset rubbers and thermoplasticsJournal of Applied Polymer Science, 2018