Examination of fuel elements irradiated in the reactor of the World’s First NPP after long-term storage
Open Access
- 17 March 2023
- journal article
- research article
- Published by Pensoft Publishers in Nuclear Energy and Technology
- Vol. 9 (1) , 51-58
Abstract
Examinations of fuel elements with two different fuel compositions, U-Mo+Mg and UO2+Mg, irradiated in the AM reactor after their long-term storage do not reveal any visible defects on the surface of their outer claddings. However, in the fuel elements with U-Mo fuel, an increase in the diameter of the outer cladding is observed. This is most noticeable in the upper part of the fuel element. Storage of the fuel elements with UO2 fuel for 15–22 years does not lead to a change in their diameter within the measurement accuracy. At the same time, metallographic studies have shown that on the external surface of the outer cladding and the internal surface of the inner cladding of the fuel elements with U-Mo+Mg and UO2+Mg fuel compositions, after long-term storage, defects are observed in the form of intergranular and irregular frontal corrosion, pits and pittings up to 20 µm deep. No interaction is found at the points of contact between the fuel claddings and the fuel composition of the layers. There is no noticeable decrease in the thickness of the outer and inner claddings of the fuel elements after long-term storage, nor does the thickness of the claddings at the locations of defects go beyond its minimum initial value, taking into account the technological tolerance for variations in thickness. It is noteworthy, however, that cracks are found in both types of fuel elements both in the fuel grains and in the magnesium matrix. As a result of long-term storage of the fuel elements with U-Mo fuel for 45–55 years, the mechanical properties of their outer claddings gradually degrade, due to which the plasticity of the cladding is significantly reduced.Keywords
This publication has 9 references indexed in Scilit:
- A Study of Flammable Gas Generation and Radionuclide Release during Underwater Handling of AM Reactor Spent FuelIzvestiya Wysshikh Uchebnykh Zawedeniy, Yadernaya Energetika, 2021
- Corrosion tests in water of fuel pins irradiated in the world’s first NPP reactorIzvestiya Wysshikh Uchebnykh Zawedeniy, Yadernaya Energetika, 2019
- Study of hydrogen generation and radionuclide release during wet damaged oxide spent fuel storageIzvestiya Wysshikh Uchebnykh Zawedeniy, Yadernaya Energetika, 2018
- Severe beyond design basis accident on Bilibino NPP EGP-6 reactor. Analysis of consequences of the radiological accident for publicIzvestiya Wysshikh Uchebnykh Zawedeniy, Yadernaya Energetika, 2018
- Analysis of a severe beyond design basis accident for the EGP-6 reactor facility at Bilibino NPP. Release source term formationIzvestiya Wysshikh Uchebnykh Zawedeniy, Yadernaya Energetika, 2018
- Post-reactor studies of fuel assemblies and a control-and-safety system channel of the reactor in the first in the world nuclear power plantAtomic Energy, 2011
- Materials-technology investigations of fuel elements, irradiated in a reactor at the obninsk nuclear power plant, after standing for 38 years in a depositoryAtomic Energy, 2000
- Conceptual aspects of nuclear power development in Russia up to 2010Atomic Energy, 1994
- Study of spent fuel elements from the first atomic electric stationAtomic Energy, 1964