On the comparative assessment of ratcheting-induced dislocation density in 42CrMo4 steel by X-ray diffraction profile analysis and hardness measurement
- 14 July 2018
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 98 (29) , 2637-2656
Abstract
The phenomenon of ratcheting occurs under the influence of non-zero mean stress during cyclic loading; it singificantly reduces the low cycle fatigue life of engineering structures. The present investigation deals with a detailed comparison on the estimation of dislocation densities in the 42CrMo4 steel induced by ratcheting using two different methods, i.e. X-ray diffraction (XRD) profile analysis and hardness. The dislocation densities in the ratcheted specimens were assessed using XRD profile analysis following the modified Williamson–Hall method as well as hardness measurements following the modified Nix and Gao model. The results showed that dislocation density increased in the ratcheted specimens as compared to the unratcheted ones and increase in accumulation of ratcheting strain was correlated with the increase in dislocation densities in the ratcheted specimens. It was established that both hardness and X-ray diffraction profile analysis methods can very effectively be used to assess the dislocation densities in the ratcheted specimens.Keywords
This publication has 33 references indexed in Scilit:
- Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steelMaterials Science and Engineering: A, 2013
- Ratcheting phenomenon and post-ratcheting tensile behaviour of an aluminum alloyMaterials Science and Engineering: A, 2012
- Determination of dislocation density from hardness measurements in metalsMaterials Letters, 2008
- Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stressesActa Materialia, 2004
- An analysis of microhardness of single-quasicrystals in the Al–Cu–Co–Si systemMaterials Science and Engineering: A, 2001
- Life prediction of rolling contact fatigue crack initiationInternational Journal of Fatigue, 2001
- Dislocations, grain size and planar faults in nanostructured copper determined by high resolution X-ray diffraction and a new procedure of peak profile analysisActa Materialia, 1998
- Indentation size effects in crystalline materials: A law for strain gradient plasticityJournal of the Mechanics and Physics of Solids, 1998
- Size dependent hardness of silver single crystalsJournal of Materials Research, 1995
- An explanation of the indentation size effect in ceramicsPhilosophical Magazine Letters, 1989