Tuning multifunctional behavior of PLA/POE‐g‐GMA/MWCNT nanocomposites: Mechanical, rheological, thermal, thermomechanical, and electromagnetic properties
- 25 June 2024
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (37)
Abstract
Nanocomposites of polylactic acid (PLA) and poly(ethylene‐octene) grafted with glycidyl methacrylate (POE‐g‐GMA) were prepared using multi‐walled carbon nanotubes (MWCNT) as conductive nanofillers. The PLA/POE‐g‐GMA/MWCNT nanocomposites were processed through extrusion and injection molding for rheological, mechanical, electromagnetic, thermal, thermomechanical, and morphological characterization. The carbon nanotubes were dispersed in the PLA/POE‐g‐GMA chain, as seen by Raman spectroscopy. With higher MWCNT content, the complex viscosity (η*) and storage modulus (G') significantly increased in the nanocomposites, suggesting percolation formation. The nanocomposites melt flow index (MFI) results indicated lower fluidity, confirming the trend in η*. Electrical conductivity was optimal for PLA/POE‐g‐GMA/MWCNT (5 phr), reaching a value of 2.21 × 10−6 S/cm and providing electromagnetic shielding of 8 dB across the entire Ku band (12.2–18 GHz). The impact strength of the nanocomposites was higher than that of pure PLA and the PLA/POE‐g‐GMA blend, while the heat deflection temperature (HDT) remained stable at around 56°C. Increased MWCNT content in the nanocomposites promoted recovery of the elastic modulus, tensile strength, and Shore D hardness compared to PLA/POE‐g‐GMA blend. Overall, the results indicate that the PLA/POE‐g‐GMA/MWCNT (5 phr) nanocomposite has potential antistatic applications.Keywords
Funding Information
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (350025/2023‐1, 312014/2020‐1, 303426/2021‐7, 141040/2022‐0)
This publication has 74 references indexed in Scilit:
- Tailoring the performance of poly(lactic acid)‐based reactive blends: The effect of vinyl acetate and dicumyl peroxide contentJournal of Applied Polymer Science, 2023
- Continuous extrusion foaming process of biodegradable nanocomposites based on poly(lactic acid)/carbonaceous nanoparticles with different geometric shapes: An insight into involved physical, chemical and rheological phenomenaJournal of Applied Polymer Science, 2023
- Ultralow percolation threshold biodegradable PLA/PBS/MWCNTs with segregated conductive networks for high‐performance electromagnetic interference shielding applicationsJournal of Applied Polymer Science, 2022
- Development of PLA/EPDM/SiO2 blended polymer for biodegradable packagingJournal of Applied Polymer Science, 2022
- Preparation and characterization of polyvinyl alcohol/polylactic acid/titanium dioxide nanocomposite films enhanced by γ‐irradiation and its antibacterial activityJournal of Applied Polymer Science, 2022
- Fe3O4@PA6/MWCNT composites with multiple gradient segregated structures for electromagnetic shielding with low reflectionJournal of Applied Polymer Science, 2022
- A short review on fused deposition modeling 3D printing of bio‐based polymer nanocompositesJournal of Applied Polymer Science, 2021
- Composition design ofPLA/TPUemulsion blends compatibilized with multifunctional epoxy‐based chain extender to tackle high impact resistant ductile structuresJournal of Applied Polymer Science, 2021
- Electrically conductive nanocomposites based on poly(lactic acid)/flexible copolyester blends with multiwalled carbon nanotubesJournal of Applied Polymer Science, 2021
- High Permittivity from Defective Multiwalled Carbon Nanotubes in the X‐BandAdvanced Materials, 2003