Influence of surface pre-treatments on porosity and microstructure of laser welding in AlSi10Mg alloys sheets fabricated by selective laser melting
Authors:
Preprint
- 19 April 2023
- preprint
- Published by Springer Nature in Research Square
Abstract
The surface pre-treatment is of great significance for improving the welding quality of metal materials, especially aluminum alloys. At present, the welding process is introduced to achieve the joining of the selective laser melting (SLM) AlSi10Mg alloys or their repair during manufacturing or service. However, the high susceptibility of hydrogen pores is one of the most important problems encountered in the fusion welding process of SLM AlSi10Mg alloys. To clarify the influence of the surface state of the base metal on the hydrogen pore characteristics, the SLM AlSi10Mg alloys sheets were pretreated by chemical cleaning treatment (CCT), mechanical polishing treatment (MPT) and chemical cleaning after mechanical polishing (MPT-CCT) before autogenous laser welding. Subsequently, the hydrogen pore characteristics, microstructure and micro-hardness of the weld joints were investigated. The experimental results show that the autogenous laser welding with MPT-CCT pre-treatment conspicuously reduces the porosity and pore diameter. In addition, TEM results show that MPT-CCT pre-treatment can eliminate most of the broken and discontinuous surface oxide film and Mg enrichment. In summary, the necessity of MPT-CCT surface pre-treatment for SLM aluminum alloy parts is analyzed systematically, which is of great significance to improve the welding quality.Keywords
All Related Versions
This publication has 31 references indexed in Scilit:
- Microstructure and mechanical properties of laser beam-welded AA2060 Al-Li alloyJournal of Materials Processing Technology, 2016
- Surface texture metrology for metal additive manufacturing: a reviewPrecision Engineering, 2016
- The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatmentMaterials Science and Engineering: A, 2016
- Electron beam welding of AlSi10Mg workpieces produced by selected laser melting additive manufacturing technologyAdditive Manufacturing, 2015
- A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4VMetallurgical and Materials Transactions A, 2015
- Friction welding of Al–12Si parts produced by selective laser meltingMaterials & Design (1980-2015), 2014
- Laser additive manufacturing of metallic components: materials, processes and mechanismsInternational Materials Reviews, 2012
- Surface Morphology in Selective Laser Melting of Metal PowdersPhysics Procedia, 2011
- Quantification of oxide film thickness at the surface of aluminium using XPSSurface and Interface Analysis, 2002
- An ESCA method for determining the oxide thickness on aluminum alloysSurface and Interface Analysis, 1990