Uniting Strength and Toughness of Al Matrix Composites with Coordinated Al3Ni and Al3Ti Reinforcements
Authors:
- 5 September 2017
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 20 (1)
Abstract
Hybrid aluminum composites are fabricated in a novel manner to characteristically induce a layer‐wise aligned distribution of micro‐scale Al3Ni and Al3Ti intermetallic particles that are formed in situ within a ductile Al matrix. The simple and unique Rolling of Randomly Orientated Layer‐wise Materials (RROLM) manufacturing methodology enables microstructural tailoring of the intermetallic reinforcing particles to prescribe enhanced crack tip deflection caused by the complex interaction of local veins of reinforcement particles, in an effort to overshadow the classical loss of toughness in large‐particle reinforced composites. The complimentary reinforcements and their interface with the Al matrix are revealed to have a gradual transition zone that functions to maintain critical cohesion with the particles and the matrix, empowering the superior load transfer capability of the particles, and reducing microvoid penetration into the matrix. In situ three‐point bending observations combined with a local strain field analysis, demonstrate the distinctive crack deflection mechanisms exhibit by the composite. Deviating from the norm, this specialized particle reinforced composite exhibited both strengthening and toughening mechanisms simultaneously, over control samples. The investigated design strategy and model material will assist materials development toward light‐weight, stronger, and tougher particle reinforced Al matrix composites.Keywords
Funding Information
- University of Virginia NMCF for electron microscopy technical support
This publication has 38 references indexed in Scilit:
- Influence of Ni on martensitic phase transformations in NiTi shape memory alloysActa Materialia, 2010
- In situ Study of Internal Load Transfer in a Novel Metal/Ceramic Composite Exhibiting Lamellar Microstructure Using Energy Dispersive Synchrotron X‐ray DiffractionAdvanced Engineering Materials, 2009
- Growth of intermetallic layer in multi-laminated Ti/Al diffusion couplesMaterials Science and Engineering: A, 2006
- Microstructure-based modeling of crack growth in particle reinforced compositesComposites Science and Technology, 2006
- Resistance-curve and fracture behavior of Ti–Al3Ti metallic–intermetallic laminate (MIL) compositesActa Materialia, 2003
- Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloysMaterials Science and Engineering: A, 2000
- Diffusion in the Ti–Al systemActa Materialia, 2000
- INFLUENCE OF PARTICLE SIZE AND VOLUME FRACTION ON DAMAGE AND FRACTURE IN Al–Al3 Ti COMPOSITES AND MICROMECHANICAL MODELLING USING THE GTN MODELFatigue & Fracture of Engineering Materials & Structures, 1998
- The deformation behaviour of intermetallic superlattice compoundsProgress in Materials Science, 1990
- In-situ deformation studies of an aluminum metal-matrix composite in a scanning electron microscopeScripta Metallurgica, 1989