Ultrahigh Stiffness and Energy Absorption Properties of Isotropic Metallic Closed Cell Microlattices
Authors:
Open Access
Abstract
To validate leading theories on isotropic mechanical metamaterial designs, pSC‐pFCC closed cell microlattices are fabricated from SS304L sheets using the LAPIS additive manufacturing technique. By removing excess material at each layer, the fully enclosed voids in the lattice design are faithfully reproduced, confirmed by micro‐CT scan, without the need to introduce release holes for precursor materials. Material anisotropy caused by the layer‐by‐layer fabrication process is removed with a post‐print heat treatment. The microlattices exhibited highly similar elastic deformation in the and axes, with stiffnesses at the Hashin‐Shtrikman theoretical limit, as predicted previously. However, this isotropy in stress–strain response is unexpectedly extended to the plastic regime as well, even though the microlattices failed via plate buckling in orientation, but by shear banding in . Moreover, the microlattices also displayed remarkable specific energy absorption (15–33 J g −1 ) and energy absorption efficiencies up to 44%, at stresses as high as 410 MPa. Material work hardening is key to this breakthrough performance, as it raised the plateau stress of the plate buckling failure to approximately the same level as the stretch‐dominated elastic limit, which allowed ultrahigh stiffness to be united with excellent energy absorption characteristics in these mechanical metamaterials.Keywords
This publication has 62 references indexed in Scilit:
- A class of elastic isotropic plate lattice materials with near-isotropic yield stressActa Materialia, 2024
- A novel triple periodic minimal surface-like plate lattice and its data-driven optimization method for superior mechanical propertiesApplied Mathematics and Mechanics, 2024
- Elastically Isotropic Truss‐Plate‐Hybrid Hierarchical Microlattices with Enhanced Modulus and StrengthSmall, 2023
- Microlattice Metamaterials with Simultaneous Superior Acoustic and Mechanical Energy AbsorptionSmall, 2021
- Additively-manufactured anisotropic and isotropic 3D plate-lattice materials for enhanced mechanical performance: Simulations & experimentsActa Materialia, 2020
- Energy Absorption Properties of Periodic and Stochastic 3D Lattice MaterialsAdvanced Theory and Simulations, 2019
- Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loadingAdditive Manufacturing, 2018
- 3D Plate‐Lattices: An Emerging Class of Low‐Density Metamaterial Exhibiting Optimal Isotropic StiffnessAdvanced Materials, 2018
- Investigation of mechanical anisotropy of the fused filament fabrication process via customized tool path generationAdditive Manufacturing, 2017
- A variational approach to the theory of the elastic behaviour of multiphase materialsJournal of the Mechanics and Physics of Solids, 1963