A detailed evaluation of surface, thermal, and flammable properties of polyamide 12/glass beads composites fabricated by multi jet fusion
Open Access
- 12 March 2021
- journal article
- research article
- Published by Taylor & Francis in Virtual and Physical Prototyping
- Vol. 16 (sup1) , S39-S52
Abstract
Multi jet fusion (MJF) is an emerging powder three-dimensional (3D) printing technology with an ultrafast printing speed, in which polyamide 12 (PA12) is the main material currently utilised. Although structurally sophisticated 3D components have been printed by MJF, there are limitations due to the high cost of printing materials and inferior performance of the printed parts. Here, PA12/glass beads (PA12/GBs) composites with improved performance were manufactured via the MJF technique. Incorporating GBs effectively regulated the dimensional accuracy. Furthermore, the composite possessed lower surface roughness and higher surface hardness than neat PA12. Thermal analysis showed that the composite exhibited an enhanced decomposition temperature (390 °C) and char yield (38.4 wt.%) compared to neat PA12. Remarkably, the incorporation of GBs did not improve the flame retardance of neat PA12. We identified the improved functionalities of PA12/GBs composites in terms of dimensional accuracy, surface, and thermal properties and analysed possible mechanisms for the observed increased flammability.Keywords
Funding Information
- SUSTech Core Research Facilities
- National Natural Science Foundation of China (51805239)
- Shenzhen Key Laboratory for Additive Manufacturing of High-performance Materials (ZDSYS201703031748354)
- Shenzhen Science and Technology Innovation Commission (KQTD2019092917250571)
This publication has 66 references indexed in Scilit:
- Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection moldingComposites Science and Technology, 2011
- Processing of a Polyamide-12/carbon nanofibre composite by laser sinteringPolymer Testing, 2011
- Polyamide‐12/Functionalized Carbon Nanofiber Composites: Evaluation of Thermal and Mechanical PropertiesMacromolecular Materials and Engineering, 2010
- The investigation of melamine polyphosphate flame retardant polyamide‐6/inorganic siliciferous filler with different geometrical formJournal of Applied Polymer Science, 2009
- Functionalized Graphenes and Thermoplastic Nanocomposites Based upon Expanded Graphite OxideMacromolecular Rapid Communications, 2009
- Dependence of mechanical properties of polyamide components on build parameters in the SLS processJournal of Materials Processing Technology, 2007
- Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sinteringMaterials Science and Engineering: A, 2006
- Mechanical and thermal properties of glass bead–filled nylon‐6Journal of Applied Polymer Science, 2004
- Poly(propylene)/poly(ethylene terephthalate‐co‐isophthalate) blends and glass bead filled composites: Microstructure and thermomechanical propertiesJournal of Applied Polymer Science, 2004
- Morphology and dynamic mechanical properties of glass beads filled low density polyethylene compositesJournal of Materials Processing Technology, 1998