Design, Fabrication and Analysis of Threshold-Value Judging Mechanism in MEMS Safety and Arming Device
Authors:
- Dakui WangDWDakui Wang
- Wenzhong LouWLWenzhong Lou
- Yue FengYFYue Feng
- Fufu WangFWFufu Wang
Preprint
- 24 March 2017
- preprint
- Published by MDPI AG in Preprints.org
Abstract
In order to meet the military requirements of the fuze, such as precision strike, efficient mutilates ability and low collateral damages, the microminiaturization is an inevitable trend of secure system. Based on the silicon-based MEMS S&A device designed by our term, the design principles of each module and fabrication process are introduced. The average fracture strength and Young's modulus of the silicon are 726 MPa and 175 GPa from the tensile test, respectively. From Hopkinson impact experiment, we can get the threshold-value judging mechanism being safety under the impact overload of 20526 g, and this value is much more than the standard of the drop overload 12000g; the arming value under the centrifugal overload obtained from theory, simulation and experiment is at the range of 28200 g and 32000 g, it shows that the threshold-value judging mechanism can be arming compared with the value 35951g of design principle. Therefore, the threshold-value judging mechanism can meet the design requirements of overload. Furthermore, the relationship of fracture threshold-values obtained by different theories is found out through parametric design method, as shown in Figure 14, it provides the theory evidence to the follow parametric design.Keywords
All Related Versions
This publication has 11 references indexed in Scilit:
- Development of MEMS Multi-Mode Electrostatic Energy Harvester Based on the SOI ProcessMicromachines, 2017
- Design and Analysis of a Silicon-Based Pattern Reconfigurable Antenna Employing an Active Element Pattern MethodMicromachines, 2017
- Design, Analysis, and Verification of Ka-Band Pattern Reconfigurable Patch Antenna Using RF MEMS SwitchesMicromachines, 2016
- Nonlinear Dynamic Behavior of a Bi-Axial Torsional MEMS Mirror with Sidewall ElectrodesMicromachines, 2016
- Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS TechnologyMicromachines, 2015
- Manufacturing and Characterization of a Thermoelectric Energy Harvester Using the CMOS-MEMS TechnologyMicromachines, 2015
- Design of a large displacement thermal actuator with a cascaded V-beam amplification for MEMS safety-and-arming devicesMicrosystem Technologies, 2015
- Trench-filled cellular parylene electret for piezoelectric transducerApplied Physics Letters, 2012
- Use of conductive adhesive for MEMS interconnection in ammunition fuze applicationsJournal of Micro/Nanolithography, MEMS, and MOEMS, 2010
- Moving reflector type micro optical switch for high-power transfer in a MEMS-based safety and arming systemJournal of Micromechanics and Microengineering, 2003