Hard Turning Performance Investigation of AISI D2 Steel under a Dual Nozzle MQL Environment
Open Access
- 4 January 2023
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 11 (1) , 16
Abstract
In recent years, hard turning has emerged as a burgeoning cutting technology for producing high-quality finishing of cylindrical-shaped hardened steel for a variety of industrial applications. Hard turning under dry cutting was not accepted because of the generation of higher cutting temperatures which accelerated tool wear and produced an inferior surface finish. Nowadays, minimum quantity lubrication (MQL) is widely accepted in hard turning to reduce the problems encountered in dry cutting. This research aimed to augment the MQL performance in the hard turning process of AISI D2 steel by applying a novel concept, namely, a dual jet nozzle MQL system that supplies the cutting fluid into the cutting zone from two different directions. The performances of hard turning are discussed using machinability indicator parameters, such as surface roughness, tool wear, cutting temperature, power consumption, noise emission, and chip morphology. The dual nozzle MQL greatly reduced the friction between contact surfaces in the cutting zone and provided improved surface quality (Ra = 0.448 to 1.265 µm). Furthermore, tool flank wear was found to be lower, in the range of 0.041 to 0.112 mm, with abrasion and adhesion being observed to be the main mode of wear mechanisms. The power consumption was greatly influenced by the depth of cut (46.69%), followed by cutting speed (40.76%) and feed (9.70%). The chip shapes were found to be helical, ribbon, and spiral c type, while the colors were a metallic, light blue, deep blue, and light golden.Keywords
This publication has 77 references indexed in Scilit:
- Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditionsJournal of Cleaner Production, 2012
- Some studies on hard turning of AISI 4340 steel using multilayer coated carbide toolMeasurement, 2012
- Machinability investigations on hardened AISI 4340 steel using coated carbide insertInternational Journal of Refractory Metals and Hard Materials, 2012
- Influence of minimum quantity lubrication parameters on tool wear and surface roughness in milling of forged steelChinese Journal of Mechanical Engineering, 2012
- Surface layer properties of AISI 316L steel when turning under dry and with minimum quantity lubrication conditionsProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012
- The role of diamond-like carbon coated drills on minimum quantity lubrication drilling of magnesium alloysSurface and Coatings Technology, 2011
- Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi methodMeasurement, 2011
- Machining evaluation of a hybrid MQL-CO2 grinding technologyJournal of Cleaner Production, 2010
- Tool wear, chip formation and workpiece surface issues in CBN hard turning: A reviewInternational Journal of Precision Engineering and Manufacturing, 2010
- Modeling flank wear of carbide tool insert in metal cuttingWear, 2005