Design and Experiment of Automatic Adjustable Transplanting End-Effector Based on Double-Cam
Open Access
- 29 April 2023
- journal article
- research article
- Published by MDPI AG in Agriculture
- Vol. 13 (5) , 987
Abstract
In view of the plugged-out end-effector that can adapt only to a specific size of the tray, the needle spacing and angle of the seedling needle are fixed. In this paper, a new type of plugged-out transplanting end-effector is proposed. The end-effector adopts a double-cam structure to automatically adjust the spacing and angle of the seedling needle, which solves the problem of picking seedlings for different sizes of trays. Firstly, the working principle of 72-hole, 128-hole, and 200-hole trays and a plugged-out end-effector was analyzed. The overall structure of the end-effector was designed. Subsequently, the EDEM software was used to construct the pot seedling model and conduct single-factor simulation experiments to identify the range of factors for the subsequent regression orthogonal experiment. Finally, a tray transplanting test platform was built. With the grasping acceleration, penetration angle, insertion depth, and insertion margin ratio as the test factors and the pot seedling breakage rate as the test evaluation indicators. A four-factor three-level orthogonal regression experiment was conducted to establish a regression model of the seedling breakage rate, and its parameters were optimized. The optimal combination is detailed as follows: a 72-hole tray grasping acceleration of 0.28 m/s2, a penetration angle of 13°, an insertion depth of 40 mm, and an insertion margin ratio of 15%; a 128-hole tray grasping acceleration of 0.28 m/s2, a penetration angle of 12°, an insertion depth of 36 mm, and an insertion margin ratio of 15%; a 200-hole tray grasping acceleration of 0.28 m/s2, a penetration angle of 11°, an insertion depth of 32 mm, and an insertion margin ratio of 10%. Under the optimal combination, the breakage rate of 72 holes reached 2.92%. The breakage rate of 128 holes was stable at 1.76%, while that of 200 holes was stable at 0.68%, which is conducive to the study of a general end-effector. The device developed in this study provides an effective solution to taking and throwing different sizes of cavitation trays, thus providing a practical reference for the study of a generic end-effector.Keywords
Funding Information
- National Natural Science Foundation of China (52075150)
This publication has 17 references indexed in Scilit:
- Design, Development and Testing of Feeding Grippers for Vegetable Plug TransplantersAgriengineering, 2021
- Development of a precision 3-row synchronised transplanterBiosystems Engineering, 2021
- Working Speed Analysis of the Gear-Driven Dibbling Mechanism of a 2.6 kW Walking-Type Automatic Pepper TransplanterMachines, 2021
- Development of embedded automatic transplanting system in seedling transplanters for precision agricultureArtificial Intelligence in Agriculture, 2021
- Development of a metering mechanism with serial robotic arm for handling paper pot seedlings in a vegetable transplanterArtificial Intelligence in Agriculture, 2021
- Kinematic Analysis of a Clamp-Type Picking Device for an Automatic Pepper TransplanterAgriculture, 2020
- Design and development of an automatic vegetable transplanter using a novel rotating finger device with push-type mechanism for plug seedlingsInternational Journal of Vegetable Science, 2020
- Design and tests of a rotary plug seedling pick-up mechanism for vegetable automatic transplanterInternational Journal of Agricultural and Biological Engineering, 2020
- Development of single row automatic transplanting device for potted vegetable seedlingsInternational Journal of Agricultural and Biological Engineering, 2018
- Design and force analysis of end-effector for plug seedling transplanterPLOS ONE, 2017