GaInAsP/InP Partially Strain-Compensated Multiple-Quantum-Wire Lasers Fabricated by Dry Etching and Regrowth Processes
Authors:
- Hideki YagiHYHideki Yagi
- Takuya SanoTSTakuya Sano
- Kazuya OhiraKOKazuya Ohira
- Dhanorm PlumwongrotDPDhanorm Plumwongrot
- Takeo MaruyamaTMTakeo Maruyama
- Anisul HaqueAHAnisul Haque
- Shigeo TamuraSTShigeo Tamura
- Shigehisa AraiSAShigehisa Arai
- 1 June 2004
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 43 (6R) , 3401-3409
Abstract
This paper reports the structural properties and lasing characteristics of GaInAsP/InP multiple-quantum-wire lasers fabricated by electron beam lithography, CH4/H2-reactive ion etching and organometallic vapor-phase-epitaxial regrowth. Good size distributions of multiple-quantum-wire structures (wire widths of 18 nm and 27 nm in a period of 80 nm) have been obtained with standard deviations less than ±2 nm. We have confirmed that low-damage etched/regrown interfaces of quantum-wire structures can be realized by using a partially strain-compensated quantum-well structure. Threshold current densities of 5-quantum-well wirelike lasers (wire widths of 43 nm and 70 nm) were found to be lower than that of the quantum-film laser, fabricated from the same initial wafer, due to a volume effect at temperatures up to 85°C. Finally, room temperature (RT)-continuous wave (CW) operation of multiple-quantum-wire lasers (wire width of 23 nm in a period of 80 nm, 5-stacked quantum-wires) was achieved, and the good reliability of this quantum-wire laser was demonstrated for the first time by means of lifetime measurement under the RT-CW condition.Keywords
This publication has 27 references indexed in Scilit:
- Distributed Reflector Laser Integrated with Active and Passive Grating Sections Using Lateral Quantum Confinement EffectJapanese Journal of Applied Physics, 2003
- GaInAsP/InP Strain-Compensated Quantum-Wire Lasers Fabricated by CH4/H2 Dry Etching and Organometallic Vapor-Phase-Epitaxial RegrowthJapanese Journal of Applied Physics, 2002
- Ground-state lasing at room temperature in long-wavelength InAs quantum-dot lasers on InP(311)B substratesApplied Physics Letters, 2001
- Low Threshold Current Density Operation of GaInAsP/InP Lasers with Strain-Compensated Multiple-Layered Wirelike Active RegionsJapanese Journal of Applied Physics, 2000
- Gain Spectrum Measurement of GaInAsP/InP Compressively-Strained Quantum-Wire LasersJapanese Journal of Applied Physics, 1998
- Fabrication and investigation of nanostructures and their application in new laser devicesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Room-temperature operation of GaInAs/GaInAsP/InP SCH lasers with quantum-wire size active regionIEEE Journal of Quantum Electronics, 1993
- Use of tilted-superlattices for quantum-well-wire lasersIEEE Transactions on Electron Devices, 1989
- Impact of sidewall recombination on the quantum efficiency of dry etched InGaAs/InP semiconductor wiresApplied Physics Letters, 1989
- Light Emission from Quantum-Box Structure by Current InjectionJapanese Journal of Applied Physics, 1987