NOVEL EPDM/PARAFFIN FOAMS FOR THERMAL ENERGY STORAGE APPLICATIONS
- 1 July 2021
- journal article
- research article
- Published by Rubber Division, ACS in Rubber Chemistry and Technology
- Vol. 94 (3) , 432-448
Abstract
The thermomechanical behavior of ethylene–propylene–diene monomer (EPDM) foams filled with different concentrations of a paraffin (melting temperature of 21 °C) are investigated for the first time. Samples were prepared by melt compounding and hot pressing, and the effects of two different foaming agents such as Expancel® 909DU80 (E) and Hostatron® P0168 (H) were investigated. Scanning electron microscopy and density measurements highlighted that the use of E foaming agent led to foams with a closed-cell morphology and a mean pore size of about 20 μm, whereas foams expanded with H were characterized by a mixed closed-/open-cell porosity with a larger cell size (of about 100 μm) and a less uniform pore distribution. Differential scanning calorimetry analysis demonstrated that the produced foams were endowed with noticeable thermal energy storage properties (up to 67 J/g with a paraffin amount of 50 wt%). The corresponding thermal parameters were found in the range of 15–50 J/cm3, which were directly dependent on the paraffin content in both heating and cooling. The drop in the maximum tensile stress at elevated paraffin contents observed in the tensile impact tests at 23 °C was counterbalanced by a noticeable enhancement of the deformation at break and of the absorbed impact energy. Tensile tests performed at 0 °C demonstrated that the addition of paraffin within the foams was responsible for a substantial increase in stiffness, whereas at 40 °C, it plays a plasticizing effect.Keywords
This publication has 47 references indexed in Scilit:
- Heat conduction enhanced shape-stabilized paraffin/HDPE composite PCMs by graphite addition: Preparation and thermal propertiesSolar Energy Materials and Solar Cells, 2010
- Thermoregulating response of cotton fabric containing microencapsulated phase change materialsThermochimica Acta, 2010
- Mechanical and morphological properties of cellular NR/SBR vulcanizates under thermal and weathering ageingJournal of Applied Polymer Science, 2009
- Foam Characteristics, Peel Strength, and Thermal Conductivity for Wood/NR and Expanded EPDM Laminates for Roofing ApplicationsJournal of Macromolecular Science, Part B, 2008
- Encapsulated Fatty Acids in an Acrylic Resin as Shape-stabilized Phase Change Materials for Latent Heat Thermal Energy StorageEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2008
- Global warming and human activity: A model for studying the potential instability of the carbon dioxide/temperature feedback mechanismEcological Modelling, 2007
- Dynamic mechanical analysis of binary and ternary polymer blends based on nylon copolymer/EPDM rubber and EPM grafted maleic anhydride compatibilizerExpress Polymer Letters, 2007
- Dynamic mechanical properties of particle‐reinforced EPDM compositesJournal of Applied Polymer Science, 2002
- Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivityEnergy Conversion and Management, 2002
- Synthesis and characterization of ion‐conducting polymer systems based on EPDM blendsJournal of Polymer Science Part B: Polymer Physics, 2001