3D‐printing of highly translucent ORMOCER®‐based resin using light absorber for high dimensional accuracy
Authors:
Open Access
- 13 July 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (3)
Abstract
Additive manufacturing, more specifically digital light processing as a form of vat photopolymerization, has attracted great interest and plays an important role in many different applications. However, it becomes complicated when complex parts with overhangs and/or pores are printed, especially if the part has to be transparent. The aim of this study is to improve the dimensional accuracy in z‐direction of highly translucent 3D‐printed parts. Therefore, ORMOCER® resin‐based materials containing different light absorbers are developed to control the penetration depth of incident light and thereby increase the resolution in z‐direction. Penetration tests are conducted and show that, in the presence of light absorbers, the curing depth can be adjusted while maintaining a high translucency of the printed part. Furthermore, a model part is developed to quantify the overpolymerization in z‐direction and the influence of the absorber. Additionally, properties that are important for future applications, for example in the dental sector, such as mechanical properties and biocompatibility, are investigated yielding promising results. Finally, a complex filigree 3D‐grid structure is fabricated applying the resin‐based absorber material.Keywords
Funding Information
- Open Access funding enabled and organized by Projekt DEAL.
This publication has 24 references indexed in Scilit:
- Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing systemReview of Scientific Instruments, 2012
- A review on stereolithography and its applications in biomedical engineeringBiomaterials, 2010
- Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturingJournal of Polymer Science Part A: Polymer Chemistry, 2009
- (Meth)acrylate‐based photoelastomers as tailored biomaterials for artificial vascular graftsJournal of Polymer Science Part A: Polymer Chemistry, 2009
- Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithographyJournal of Micromechanics and Microengineering, 2008
- Photopolymers for rapid prototypingJournal of Coatings Technology and Research, 2007
- Projection micro-stereolithography using digital micro-mirror dynamic maskSensors and Actuators A: Physical, 2005
- Micro-stereolithography of polymeric and ceramic microstructuresSensors and Actuators A: Physical, 1999
- Effect of photoinitiator level on properties of a light-cured and post-cure heated model resin systemDental Materials, 1997
- A new class of inorganic base-generating photoinitiatorsChemistry of Materials, 1992