Experimental and numerical analysis of the performance of the R290 rotary compressor used in a split-room air conditioner at high ambient temperature
Authors:
- 3 November 2020
- journal article
- research article
- Published by Taylor & Francis in Science and Technology for the Built Environment
- Vol. 27 (2) , 226-239
Abstract
To respond to new energy efficiency standards and environmentally friendly policies in hot climate regions, it is necessary to develop high-efficiency air conditioners. The environmentally friendly and favourable thermo-physical properties of R290 and the high efficiency of rotary compressors have led to the proposal of R290 rotary compressors for use in split-room air conditioners in hot climate regions. The performance of R290 rotary compressor at high temperatures requires in-depth research. In this study, an R290 rotary compressor was experimentally and numerically studied at different ambient temperatures (ta = 35 °C, 46 °C, and 55 °C), using different oils (mineral oil (MO) and synthetic oil (SO)). The results show that the volumetric efficiency (ηv) and adiabatic efficiency (ηad) of the R290 rotary compressor decrease by only 5% and 6%, respectively, from ta = 35 °C to 55 °C; even at 55 °C, ηv and ηad are 89% and 67%, respectively, while the decrements of the R32 rotary compressor both reached more than 10%. In addition, the R290 rotary compressor performance differs with different oils because of miscibility, solubility, and viscosity influences on leakage and friction losses.Keywords
Funding Information
- National Natural Science Foundation of China (51676147)
- HCFC phase-out management plan in room air conditioning sector technical assistance fund (C/III/S16/154)
This publication has 18 references indexed in Scilit:
- Oil type influence on the optimal charge and performance of a propane chillerInternational Journal of Refrigeration, 2011
- Propane gas leak detection by infrared absorption using carbon infrared emitter and infrared cameraNDT & E International, 2011
- Flame propagation of butanol isomers/air mixturesProceedings of the Combustion Institute, 2011
- Experimental and computed burning velocities of propane–air mixturesEnergy Conversion and Management, 2010
- Performance of a large capacity propane heat pump with low charge heat exchangersInternational Journal of Refrigeration, 2010
- The Stribeck curve and lubrication design for non-fully wetted surfacesWear, 2009
- Propane heat pump with low refrigerant charge: design and laboratory testsInternational Journal of Refrigeration, 2004
- Contributions of Returned Scholars to Recent Economic Development in TaiwanChinese Studies in History, 2002
- Fatigue Properties of TiNi Shape Memory AlloyMaterials Science Forum, 2000
- Leakage losses with a rolling piston type rotary compressor. I. Radical clearance on the rolling pistonInternational Journal of Refrigeration, 1985