Dynamic Finite Element Implementation of Nonlinear, Anisotropic Hyperelastic Biological Membranes
Authors:
- 1 February 2003
- journal article
- research article
- Published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering
- Vol. 6 (1) , 33-44
Abstract
We present a novel method for the implementation of hyperelastic finite strain, non-linear strain-energy functions for biological membranes in an explicit finite element environment. The technique is implemented in LS-DYNA but may also be implemented in any suitable non-linear explicit code. The constitutive equations are implemented on the foundation of a co-rotational uniformly reduced Hughes-Liu shell. This shell is based on an updated-Lagrangian formulation suitable for relating Cauchy stress to the rate-of-deformation, i.e. hypo -elasticity. To accommodate finite deformation hyper -elastic formulations, a co-rotational deformation gradient is assembled over time, resulting in a formulation suitable for pseudo-hyperelastic constitutive equations that are standard assumptions in biomechanics. Our method was validated by comparison with (1) an analytic solution to a spherically-symmetric dynamic membrane inflation problem, incorporating a Mooney-Rivlin hyperelastic equation and (2) with previously published finite element solutions to a non-linear transversely isotropic inflation problem. Finally, we implemented a transversely isotropic strain-energy function for mitral valve tissue. The method is simple and accurate and is believed to be generally useful for anyone who wishes to model biologic membranes with an experimentally driven strain-energy function.Keywords
This publication has 17 references indexed in Scilit:
- Dynamic inflation of non-linear elastic and viscoelastic rubber-like membranesInternational Journal for Numerical Methods in Engineering, 2001
- A New Constitutive Framework for Arterial Wall Mechanics and a Comparative Study of Material ModelsJournal of Elasticity, 2000
- A Three-Dimensional Finite Element Method for Large Elastic Deformations of Ventricular Myocardium: II—Prolate Spheroidal CoordinatesJournal of Biomechanical Engineering, 1996
- Finite element implementation of incompressible, transversely isotropic hyperelasticityComputer Methods in Applied Mechanics and Engineering, 1996
- Influence of size, shape and properties on the mechanics of axisymmetric saccular aneurysmsJournal of Biomechanics, 1996
- Finite element analysis of nonlinear orthotropic hyperelastic membranesComputational Mechanics, 1996
- Passive Material Properties of Intact Ventricular Myocardium Determined From a Cylindrical ModelJournal of Biomechanical Engineering, 1991
- Determination of a Constitutive Relation for Passive Myocardium: II.—Parameter EstimationJournal of Biomechanical Engineering, 1990
- Nonlinear finite element shell formulation accounting for large membrane strainsComputer Methods in Applied Mechanics and Engineering, 1983
- Nonlinear finite element analysis of shells: Part I. three-dimensional shellsComputer Methods in Applied Mechanics and Engineering, 1981