Utilizing hammer tests and ultrasonic pulse velocity to ascertain the compressive strength of concrete
Authors:
Open Access
- 1 April 2024
- conference paper
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1324 (1)
Abstract
This study aimed to estimate the compressive strength of concrete in an existing building using non-destructive testing methods, specifically the hammer test and ultrasonic pulse velocity. The hammer test employed two types of tools, type N, which reads the rebound number (R), and another type that reads the rebound coefficient (Q) value. In the study, 40 column samples were tested, revealing concrete quality measurements of 30.5 MPa and 27.8 MPa obtained from hammer test type N and rebound coefficient (Q), respectively. Meanwhile, the ultrasonic pulse velocity reading was 3288 m/s. The data from the hammer test type N and rebound coefficient (Q) were correlated with the velocity of an ultrasonic pulse velocity, resulting in a linear regression formula of f’c = 0.0137x - 17.12 and f’c = 0.0099x - 2.1973, respectively. The coefficient of determination (R2) of hammer test type N and velocity of an ultrasonic pulse velocity was 0.64, while the coefficient of determination (R2) of hammer test Q value and velocity of an ultrasonic pulse velocity was 0.70. The research predicted that the model for determining the quality of concrete by correlating the hammer test Q value with the velocity of an ultrasonic pulse velocity was better than using hammer test type N.Keywords
This publication has 6 references indexed in Scilit:
- Investigation with Non-Destructive and Destructive Methods for Assessment of Concrete Compressive StrengthApplied Sciences, 2022
- Concrete compressive strength prediction using non-destructive tests through response surface methodologyAin Shams Engineering Journal, 2020
- Non-destructive and semi-destructive diagnostics of concrete structures in assessment of their durabilityBulletin Of The Polish Academy Of Sciences-Technical Sciences, 2015
- Non-Destructive Testing of Concrete: A Review of MethodsElectronic Journal of Structural Engineering, 2015
- Comparison of electronic and mechanical Schmidt hammers in the context of exposure‐age dating: are Q‐ and R‐values interconvertible?Earth Surface Processes and Landforms, 2014
- Review of Nondestructive Testing Methods for Condition Monitoring of Concrete StructuresJournal of Construction Engineering, 2013