Tunable 3-pole bandpass filter with constant absolute bandwidth and >60 dB rejection at desired location of stopband
- 21 January 2015
- journal article
- research article
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 29 (4) , 502-513
Abstract
This paper presents a novel design approach for tunable 3-pole bandpass filter (BPF) with constant bandwidth (ABW) and deep rejection at the desired stopband. First, by properly designing the coupling coefficient and Qext, the tunable 3-pole BPF is designed with the characteristic of constant ABW. Only two bias voltages are adopted to complete the tuning, among which one of them is used to tune the center frequency and the other one is adopted to control the Qext. Then, bandstop resonators are introduced to provide deep rejection at desired stopband. A deep rejection level >60 dB can be easily controlled by varying the loaded capacitor Cbs among the stopband. Furthermore, the designed deep rejection point can be constant and produces little influence on the passband. For demonstration, a 3-pole tunable BPF is designed, fabricated, and measured. The filter can be tuned from 0.98 to 1.4 GHz with constant ABW, a wide fractional tuning range up to 40% can be attained. High rejection level >60 dB is realized at the pre-designed stopband point 0.65 GHz. The measurement shows good agreement with the simulation.Keywords
Funding Information
- National Natural Science Foundation of China (NSFC) (61271090, 61401375)
- National 863 Project of China (2012AA012305)
- Fundamental Research Funds for the Central Universities (2682014RC24)
- Cultivation Project of Sichuan Province Science and Technology Innovation Seedling Project (2014-047)
- Program of China Scholarship Council (201407000007)
This publication has 16 references indexed in Scilit:
- Tunable 1.55–2.1 GHz 4-Pole Elliptic Bandpass Filter With Bandwidth Control and ${> 50}~{\hbox {dB}}$ Rejection for Wireless SystemsIEEE Transactions on Microwave Theory and Techniques, 2012
- A Tunable Combline Bandpass Filter Loaded With Series ResonatorIEEE Transactions on Microwave Theory and Techniques, 2012
- A Tunable Microstrip Bandpass Filter With Two Independently Adjustable Transmission ZerosIEEE Microwave and Wireless Components Letters, 2011
- Compact Low-Loss Tunable $X$-Band Bandstop Filter With Miniature RF-MEMS SwitchesIEEE Transactions on Microwave Theory and Techniques, 2010
- Low-Loss Frequency-Agile Bandpass Filters With Controllable Bandwidth and Suppressed Second HarmonicIEEE Transactions on Microwave Theory and Techniques, 2010
- Corrugated Microstrip Coupled Lines for Constant Absolute Bandwidth Tunable FiltersIEEE Transactions on Microwave Theory and Techniques, 2010
- Tunable slotted ground structured bandstop filter with BST varactorsIET Microwaves, Antennas & Propagation, 2009
- Low-Loss 4–6-GHz Tunable Filter With 3-Bit High-$Q$ Orthogonal Bias RF-MEMS Capacitance NetworkIEEE Transactions on Microwave Theory and Techniques, 2008
- Low-Loss Two-Pole Tunable Filters With Three Different Predefined Bandwidth CharacteristicsIEEE Transactions on Microwave Theory and Techniques, 2008
- Low-Loss 5.15–5.70-GHz RF MEMS Switchable Filter for Wireless LAN ApplicationsIEEE Transactions on Microwave Theory and Techniques, 2006