Effects of Hybridisation on the Low Velocity Falling Weight Impact and Flexural Properties of Flax-Carbon/Epoxy Hybrid Composites
Open Access
Abstract
The trend of research and adoption of natural plant-based fibre reinforced composites is increasing, with traditional synthetic fibres such as carbon and glass experiencing restrictions placed on their manufacture and use by legislative bodies due to their environmental impact through the entire product life cycle. Finding suitable alternatives to lightweight and high-performance synthetic composites will be of benefit to the automotive, marine and aerospace industries. This paper investigates the low-velocity impact (LVI) and flexural properties and damage characteristics of flax-carbon/epoxy hybrid composites to be used in structural lightweight applications. LVI, for example, is analogous to several real-life situations, such as damage during manufacture, feasibly due to human error such as the dropping of tools and mishandling of the finished product, debris strikes of aircraft flight, or even the collision of a vessel with another. Carbon fibre has been hybridised with flax fibres to achieve enhanced impact and flexural performance. The failure mechanisms of woven flax and flax-carbon epoxy hybrid composites have been further analysed using Scanning Electron Microscopy (SEM). It was observed from the experimental results that carbon fibre hybridisation has a significant effect on the impact and flexural properties and their damage modes. The results obtained from this study exhibited that the flexural strength and modulus of plain flax/epoxy composite increase significantly from 95.66 MPa to 425.87 MPa and 4.78 GPa to 17.90 GPa, respectively, with carbon fibre hybridisation. This significant improvement in flexural properties would provide designers with important information to make informed decisions during material selection for lightweight structural applications.Keywords
This publication has 11 references indexed in Scilit:
- Interface properties and their effect on the mechanical performance of flax fibre thermoplastic compositesComposites Part A: Applied Science and Manufacturing, 2019
- Bio-Polyamide 11 Hybrid Composites Reinforced with Basalt/Flax Interwoven Fibers: A Tough Green Composite for Semi-Structural ApplicationsFibers, 2019
- Quasi-Static and Low-Velocity Impact Behavior of Intraply Hybrid Flax/Basalt CompositesFibers, 2019
- Tensile and compressive damaged response in Flax fibre reinforced epoxy compositesComposites Part A: Applied Science and Manufacturing, 2017
- Damage tolerance of carbon/flax hybrid composites subjected to low velocity impactComposites Part B: Engineering, 2016
- Why are designers fascinated by flax and hemp fibre composites?Composites Part A: Applied Science and Manufacturing, 2016
- Effect of basalt fibre hybridisation on post-impact mechanical behaviour of hemp fibre reinforced compositesComposites Part A: Applied Science and Manufacturing, 2015
- Effect of temperature and hybridisation on the low velocity impact behavior of hemp-basalt/epoxy compositesComposite Structures, 2015
- Falling weight impact response of jute/methacrylated soybean oil bio-composites under low velocity impact loadingComposites Science and Technology, 2014
- Development of flax/carbon fibre hybrid composites for enhanced propertiesCarbohydrate Polymers, 2013