Abstract
This letter introduces an inductor-less eight-path balanced-to-unbalanced (balun) bandpass filter that performs single-to-differential conversion by switching the bottom plate of the $N$ -path filter capacitors between ground and the negative terminal of the differential output. Measurement results of a 0.32-mm $^2$ 65-nm CMOS chip demonstrate an insertion loss below 3 dB, power consumption below 12.2 mW, a tunable range of 0.1–1 GHz, a high-selectivity filtering performance with a bandwidth of $\sim$ 30 MHz, and input impedance matching capability. The amplitude (phase) imbalance is less than 0.3 dB ( $\pm{3}^\circ$ ) over the tuning range. The measured in-band IIP $_{3}$ , IIP $_{2}$ , OP $_{1}$ dB, and simulated noise figure are $+$ 13.8 dBm, $+$ 38 dBm, $-$ 4 dBm, and 2.45 dB, respectively, at a center frequency of 500 MHz.
Funding Information
  • Academic Senate Faculty Research Grant from the University of California Santa Barbara

This publication has 18 references indexed in Scilit: