Anodic copper oxide nanowire and nanopore arrays with mixed phase content: synthesis, characterization and optical limiting response
Open Access
- 1 November 2017
- journal article
- Published by IOP Publishing in Journal of Physics Communications
- Vol. 1 (4) , 045012
Abstract
Thin films consisting of copper oxide nanowires (NWs) containing a mixture of copper oxide phases were formed by electrochemical anodization in de-ionized water (DI) and methanol based electrolytes. Well-defined arrays of vertical nanopores were obtained via anodization in ethylene glycol (EG)-based electrolytes. Optical absorption spectra revealed the electronic bandgap of the NWs formed in DI and methanol to be 2.50 eV, and that of nanopores formed in EG electrolytes to be 1.94 eV. The nanostructures were found to exhibit p-type conduction through Mott-Schottky analysis. The as-formed nanostructures exhibited two photon photoluminescence with lifetimes ranging between 200 and 1100 ps. They also displayed strong optical limiting in the form of a 25% decrease in optical transmission at 800 nm at a relatively low fluence of 0.1 J cm-2 and an absolute transmittance <50% over the entire range of laser fluence values used in this study. The optical transmittance decreased from 40% at an incident Ti-sapphire laser fluence of 20 mJ cm-2 to ∼9% when the fluence was increased to 700 mJ cm-2. Furthermore, the damage threshold of 0.7 J cm-2 compares favorably with advanced optical limiting materials such as gold-graphene composites and single-walled carbon nanotube composites even without further optimization of nanoscale morphology to maximize scattering. Therefore the nanostructures of mixed copper oxide films studied in this report are particularly promising as optical limiters for protecting low damage threshold (<1 J cm-2) photonic devices and are an important addition to the narrow selection of optical limiting materials that are currently available.Keywords
Funding Information
- Canada Foundation for Innovation (24661)
- Alberta Innovates - Technology Futures
- Natural Sciences and Engineering Research Council of Canada (06630)
- CMC Microsystems
This publication has 33 references indexed in Scilit:
- Optical Limiting in Cu/CuO Nanostructures Formed by Magnetic Field-Assisted AnodizationJournal of Nanoscience and Nanotechnology, 2017
- Copper oxide as efficient catalyst for oxidative dehydrogenation of alcohols with airCatalysis Science & Technology, 2015
- Copper oxide based nanostructures for improved solar cell efficiencyThin Solid Films, 2014
- Anodic Cu 2 S and CuS nanorod and nanowall arrays: preparation, properties and application in CO 2 photoreductionNanoscale, 2014
- One-dimensional copper oxide nanotube arrays: biosensors for glucose detectionRSC Advances, 2013
- Copper oxide nanostructures: Controlled synthesis and their catalytic performanceSolid State Sciences, 2013
- Optical limiting properties in copper oxide thin films under a high-repetition-rate femtosecond laserMaterials Letters, 2013
- Copper oxide nanowires: a review of growthNanotechnology, 2012
- One-Pot Synthesis of Uniform Cu2O and CuS Hollow Spheres and Their Optical Limiting PropertiesChemistry of Materials, 2008
- Growth of Different Nanostructures of Cu2O (Nanothreads, Nanowires, and Nanocubes) by Simple Electrolysis Based Oxidation of CopperThe Journal of Physical Chemistry C, 2007