Film formation of hard‐core/soft‐shell latex particles
Authors:
- 25 November 2022
- journal article
- research article
- Published by Wiley in Journal of Polymer Science
- Vol. 61 (5) , 410-421
Abstract
Multiphase latex particles can be used to overcome some of the limitations with regards to the mechanical properties of films cast from homogeneous latexes while maintaining a reasonably low minimum film formation temperature (MFFT). In this work, we focus on the synthesis and film formation behavior of a series of hard‐core/soft‐shell latexes with varying compositions. It is shown that below a hard‐core content of around 60 wt% the MFFT is almost exclusively dependent on the glass transition temperature of the polymer that forms the soft‐shell. Above hard‐core contents of 60 wt% there is an abrupt increase of the MFFT and film formation is significantly restricted. This behavior is ascribed to the packing behavior of the hard phase. It is shown that the MFFT can be decreased by the use of blends of core‐shell particles of different size such that the packing fraction of the hard domains is improved. This is demonstrated by the counterintuitive result that a blend of two latexes with high MFFT can result in a latex with significantly reduced MFFT. The mechanical properties of the resulting films are also explored in order to determine the limits of hard‐core/soft‐shell systems with regards to their use in coatings applications.Keywords
Funding Information
- Euskal Herriko Unibertsitatea
This publication has 28 references indexed in Scilit:
- Influence of the Particle Size and Particle Size Ratio on the Morphology and Viscoelastic Properties of Bimodal Hard/Soft Latex BlendsMacromolecules, 2004
- Prediction of the elastic response of polymer based nanocomposites: a mean field approach and a discrete simulationComposites Science and Technology, 2003
- Large deformation of films from soft‐core/hard‐shell hydrophobic laticesJournal of Polymer Science Part B: Polymer Physics, 2002
- Film Formation of Latex Blends with Bimodal Particle Size Distributions: Consideration of Particle Deformability and Continuity of the Dispersed PhaseMacromolecules, 2000
- A Process Model for Latex Film Formation: Limiting Regimes for Individual Driving ForcesLangmuir, 1999
- Influence of Morphology on Film Formation of Acrylic Dispersions1996
- Mechanical properties of films from polymer laticesPolymers for Advanced Technologies, 1995
- A new method to predict the maximum packing fraction and the viscosity of solutions with a size distribution of suspended particles. IIJournal of Applied Polymer Science, 1993
- Effects of core‐shell latex morphology on film forming behaviorJournal of Applied Polymer Science, 1990
- The Elastic and Thermo-elastic Properties of Composite MediaProceedings of the Physical Society. Section B, 1956